Magnesium (Mg) is abundant, green and low-cost element. Magnesium-air (Mg-air) battery
has been used as disposable lighting power supply, emergency and reserve batteries. It is …

Zn is an eco-friendly element with high solid solubility (6.2 wt%) in Mg. In this research, four
hypoeutectic Mg-xZn (x= 2, 4, 6, and 15 wt%) binary alloys are systematically investigated as …

The effects of Sr additions, heat treatment (T4 and T6), and multi-directional forging on the
microstructural evolution, mechanical properties and biodegradability of Mg–4Zn–xSr alloys …

The mechanisms of dislocation/precipitate interaction as well as the critical resolved shear
stress were determined as a function of temperature in an Mg–4 wt% Zn alloy by means of …

The microstructural evolution, texture and mechanical properties of nine Mg-4Zn-xCa-yMn
alloys (x= 0.3, 0.6, 1.0; y= 0.2, 0.3, 0.7 wt.%) were investigated systematically. Alloying with …

Abstract Biodegradable Mg–Ag alloys are promising implants for bone regeneration owing
to their ability to decrease inflammation and infection after implantation by the presence of …

The effects of 2wt.% rare earth element addition on the microstructure evolution, thermal
stability and shear strength of AZ91 alloy were investigated in the as-cast and annealed …

The hot deformation behavior of as-cast Mg-2Zn-0.5 Mn-0.2 Ca alloys was investigated by
hot compression tests conducted at 250–400° C with strain rates of 0.001–1 s− 1. The true …

In this research, effect of alloying elements (X= Cu, Co, Ni, Sb and Bi) and growth rates on
the microstructure and mechanical properties (microhardness and tensile strength) of the …

Abstract The effect of 0.5, 1 and 1.5 wt% Ag addition on the microstructural evolution,
thermal stability and mechanical properties of an Mg–5 wt% Gd–1 wt% Y (GW51) alloy was …