Multiparameter and multiobjective optimization design based on orthogonal method for mixed flow fan
H Fan, J Zhang, W Zhang, B Liu - Energies, 2020 - mdpi.com
Optimization design of an impeller is critical for the energy performance of a fan. This paper
takes the promotion of fan efficiency and pressure rise as the optimization objectives to carry …
takes the promotion of fan efficiency and pressure rise as the optimization objectives to carry …
采用Kriging 模型的离心压缩机叶轮多目标参数优化.
左曙光， 韦开君， 吴旭东， 聂玉洁… - Transactions of the …, 2016 - search.ebscohost.com
为进一步探索高性能, 低噪声的离心压缩机优化设计方法, 该文选用某燃料电池车用小型高转速
离心压缩机为研究对象, 通过三维内流场非定常分析对其气动性能和气动噪声进行计算 …
离心压缩机为研究对象, 通过三维内流场非定常分析对其气动性能和气动噪声进行计算 …
Multi-stage optimization of centrifugal fan and casing with preliminary design and mesh morphing method
A multi-stage optimization with preliminary design and shape optimization has been
conducted to improve the aerodynamic performance of a centrifugal fan system. In …
conducted to improve the aerodynamic performance of a centrifugal fan system. In …
Centrifugal blower optimization using gradient-free approaches and RANS simulation
View Video Presentation: https://doi. org/10.2514/6.2023-3313. vid In this study, an
optimization approach based solely on open-source libraries is employed to optimize a …
optimization approach based solely on open-source libraries is employed to optimize a …
[HTML][HTML] 多目标优化在流体机械中的应用研究综述
陶粤婷， 王伟， 吴玉庭， 马重芳 - Sustainable Energy, 2024 - hanspub.org
流体机械综合性能提升有利于提高能源系统能效, 引入多目标优化方法对流体机械展开性能优化
研究, 可以进一步改善流体机械整体性能. 因此针对多目标优化方法在流体机械性能优化中的 …
研究, 可以进一步改善流体机械整体性能. 因此针对多目标优化方法在流体机械性能优化中的 …
Suppression of secondary flows in a centrifugal impeller by optimisation design
X Xie, Z Li, B Zhu, H Wang - Engineering Computations, 2020 - emerald.com
Purpose The purpose of this study is to suppress secondary flows and improve aerodynamic
performance of a centrifugal impeller. Design/methodology/approach A multi-objective …
performance of a centrifugal impeller. Design/methodology/approach A multi-objective …
[HTML][HTML] 多级导流诱导轮与叶轮一体型线优化
李嘉， 李华聪， 王淑红， 徐轩 - 2016 - html.rhhz.net
通过分析型线参数化系数与结构参数的相关性联系, 实现基于型线的参数化改型,
从而达到多级导流一体式诱导轮与叶轮性能优化的目的. 采用最小二乘法实现叶轮型线拟合 …
从而达到多级导流一体式诱导轮与叶轮性能优化的目的. 采用最小二乘法实现叶轮型线拟合 …
Profile optimization of multi-diversion combination inducer and impeller
J LI, H LI, S WANG, X XU - 北京航空航天大学学报, 2016 - bhxb.buaa.edu.cn
As the research objective is to optimize the performance of the combination multi-diversion
inducer and impeller, this paper carries out the profile optimization study based on the …
inducer and impeller, this paper carries out the profile optimization study based on the …
Design and analysis of 2D blade profile on a centrifuge impeller
D Jing-liang, CHU Wu-li, Z Hao-guang - Journal of Propulsion …, 2014 - jpt.tjjsjpt.com
A new method of 2D blade profile design on a centrifugal impeller was proposed to improve
the aerodynamic performance of the impeller. The blade profile was designed through full …
the aerodynamic performance of the impeller. The blade profile was designed through full …