Enhanced heat transfer

RL Webb, NY Kim - Taylor and Francis, NY, 2005 - dl.begellhouse.com
Transition between nucleate and film boiling potentially causes dramatic temperature
changes during fluxcontrolled operations, which may lead to catastrophic equipment …

Donald Q. Kern lecture award paper: odyssey of the enhanced boiling surface

RL Webb - J. Heat Transfer, 2004 - asmedigitalcollection.asme.org
This paper traces the evolution of enhanced boiling surfaces. Early work was highly
empirical and done in industrial research. The 1968 Milton patent [“Heat Exchange System,” …

Two-phase flow and heat transfer across horizontal tube bundles‐A review

G Ribatski, JR Thome - Heat transfer engineering, 2007 - Taylor & Francis
This paper presents a state-of-the-art review of two-phase flow and flow boiling across
horizontal tube bundles. The review covers studies related to the dynamic aspects of two …

Performance of different structured surfaces in nucleate pool boiling

AK Das, PK Das, P Saha - Applied Thermal Engineering, 2009 - Elsevier
Several structured surfaces have been developed in-house for the augmentation of boiling
heat transfer using distilled water as test fluid under atmospheric pressure. These surfaces …

Experimental insights of boiling heat transfer over laser-engraved textured surfaces through bubble dynamics study

A Kumar, N Laskar, MK Das - … Communications in Heat and Mass Transfer, 2024 - Elsevier
The significance of structured surfaces for energy conservation in two-phase heat transfer
applications is well-recognized within the scientific community. Introducing advanced non …

Pool-boiling enhancement using multilevel modulated wick

Y Nasersharifi, M Kaviany, G Hwang - Applied Thermal Engineering, 2018 - Elsevier
Main challenges in saturated pool-boiling heat transfer are limited Critical Heat Flux (CHF)
and Heat Transfer Coefficient (HTC), caused by the counterflow of liquid and vapor over the …

Thermal characteristics of a resurfaced condenser and evaporator closed two-phase thermosyphon

M Rahimi, K Asgary, S Jesri - … Communications in Heat and Mass Transfer, 2010 - Elsevier
This paper reports a study on the effect of the condenser and evaporator resurfacing on
overall performance of a 1m height closed two-phase thermosyphon. Water was used as …

Experimental pool boiling study on novel multistage cross-flow porous structure using FC-72 for high-heat-flux electronic applications

Y Shah, HG Kim, WW Choi, SM Kim - … Journal of Heat and Mass Transfer, 2023 - Elsevier
An experimental pool boiling study on multistage cross-flow porous structure was conducted
under atmospheric pressure using saturated FC-72 as the working fluid. The novel design …

Enhancement of nucleate boiling heat transfer using structured surfaces

VV Nirgude, SK Sahu - Chemical Engineering and Processing: Process …, 2017 - Elsevier
In the present study, an experimental investigation has been carried out to investigate the
nucleate boiling heat transfer performance of various orthogonally intersecting tunnel …

Morphological change of plain and nano-porous surfaces during boiling and its effect on nucleate pool boiling heat transfer

CY Lee, BJ Zhang, KJ Kim - Experimental Thermal and Fluid Science, 2012 - Elsevier
In order to investigate nucleate pool boiling heat transfer characteristics in saturated water, a
plain aluminum alloy surface (6061, untreated) and a uniquely fabricated aluminum oxide …