Micro-scale deformation aspects of additively fabricated stainless steel 316L under compression
The deformation aspects associated with the micro-mechanical properties of the powder
laser bed fusion (P-LBF) additively manufactured stainless steel 316L were investigated in …
laser bed fusion (P-LBF) additively manufactured stainless steel 316L were investigated in …
Predicting and correlating melt pool characteristics with processing parameters in IN625 powder bed fusion additive manufacturing
M Abdelmoula, W Musinski - Journal of Manufacturing Processes, 2024 - Elsevier
Predicting the melt pool's various characteristics and developing a reliable correlation
between these melt pool characteristics and powder bed fusion (PBF) process parameters is …
between these melt pool characteristics and powder bed fusion (PBF) process parameters is …
Investigation on Mechanism of Microstructure Evolution during Multi-Process Hot Forming of GH4169 Superalloy Forging
Typically, in the manufacturing of GH4169 superalloy forgings, the multi-process hot forming
that consists of pre-deformation, heat treatment and final deformation is required. This study …
that consists of pre-deformation, heat treatment and final deformation is required. This study …
Additive Manufacturing of Al-12Si Alloy by Powder Laser Bed Fusion: an Investigation into its Microstructural Processes Formation and its Effects on Mechanical …
A Alamry - Silicon, 2024 - Springer
Additive manufacturing (AM) has evolved as an innovative approach to building 3D objects
by addition of layer-upon-layer of material, which has brought some added industrial …
by addition of layer-upon-layer of material, which has brought some added industrial …
激光增材镍基合金内部疲劳失效行为研究
孙传文， 孙锐 - 工程科学学报 - cje.ustb.edu.cn
内部失效是激光增材制造镍基高温合金在高温下的典型疲劳失效模式, 目前对这种失效模式的认
知尚不充分. 在650℃ 下进行了不同应力比的轴向疲劳试验, 随后采用扫描电镜 …
知尚不充分. 在650℃ 下进行了不同应力比的轴向疲劳试验, 随后采用扫描电镜 …
Investigation on Micro-scale Deformation of Additively Manufactured Inconel 718: Role of Segregation on Melt-pool Boundaries
Inconel 718, a Ni-based superalloy, was prepared by powder laser bed fusion (P-LBF)
additive manufacturing (AM) method. AM of the Inconel 718 is challenging, as this particular …
additive manufacturing (AM) method. AM of the Inconel 718 is challenging, as this particular …