Joining of engineering ceramics
JA Fernie, RAL Drew, KM Knowles - International Materials …, 2009 - Taylor & Francis
Engineering ceramics such as alumina, zirconia, silicon nitride and silicon carbide can now
be manufactured reliably with reproducible properties. As such, they are of increasing …
be manufactured reliably with reproducible properties. As such, they are of increasing …
Preparation and properties of Al2O3 nanoparticle reinforced copper matrix composites by in situ processing
F Shehata, A Fathy, M Abdelhameed, SF Moustafa - Materials & Design, 2009 - Elsevier
It is well known that Cu–Al2O3 nanocomposite materials have high potential for use in
structural applications in which enhanced mechanical characteristics are required …
structural applications in which enhanced mechanical characteristics are required …
In-situ formation of Cu–Al2O3 nano-scale composites by chemical routes and studies on their microstructures
PK Jena, EA Brocchi, MS Motta - Materials Science and Engineering: A, 2001 - Elsevier
Copper–alumina composite briquettes have been prepared by hydrogen (pH2= 0.1 atm)
reduction of a homogeneous mixture of finely divided CuO and Al2O3 formed by two …
reduction of a homogeneous mixture of finely divided CuO and Al2O3 formed by two …
Interfacial characteristics and wear performances of iron matrix composites reinforced with zirconia-toughened alumina ceramic particles
Zirconia-toughened alumina ceramic particle (ZTA P)-reinforced high Cr cast Fe matrix
composites (ZTA P/Fe composites) are promising advanced wear-resistant materials …
composites (ZTA P/Fe composites) are promising advanced wear-resistant materials …
A study of solid-state bonding-by-hot-deforming mechanism in Inconel 718
Solid-state bonding shows irreplaceable advantages in joining similar and dissimilar
materials with poor weldability compared with fusion welding methods. To widen its …
materials with poor weldability compared with fusion welding methods. To widen its …
Fabrication of copper–alumina nanocomposites by mechano-chemical routes
F Shehata, A Fathy, M Abdelhameed… - Journal of Alloys and …, 2009 - Elsevier
It is well known that Cu–Al2O3 nanocomposite materials have high potential for use in
structural applications in which enhanced mechanical characteristics are required …
structural applications in which enhanced mechanical characteristics are required …
Microstructure and strength of Al2O3/Al2O3 joints bonded with ZnO–Al2O3–B2O3–SiO2 glass–ceramic
W Zhu, J Chen, C Hao, J Zhang - Journal of Materials Science & …, 2014 - Elsevier
ZnO–Al 2 O 3–B 2 O 3–SiO 2 (ZABS) glass powder was used as interlayer to join alumina
ceramics. The effect of joining temperature on the microstructure and strength of joints was …
ceramics. The effect of joining temperature on the microstructure and strength of joints was …
Interfacial energy as the driving force for diffusion bonding of ceramics
Diffusion bonding of ceramics with a metallic interlayer can give a variety of very complex
joint microstructures, which are highly influenced by ceramic compositions, the material and …
joint microstructures, which are highly influenced by ceramic compositions, the material and …
Microstructure and mechanical properties of Fe matrix composites reinforced by nickel–chromium double-layer coated ZTAP ceramics
C Li, Y Li, J Wang, B Li, D Yi, J Shi, Q Zheng, Y Gao… - Ceramics …, 2020 - Elsevier
The preparation, microstructure and mechanical properties of ZTA particles reinforced Fe
matrix composites (ZTA P/Fe composites) were systematically investigated. The X-ray …
matrix composites (ZTA P/Fe composites) were systematically investigated. The X-ray …
[HTML][HTML] Develop a new strain rate sensitive solid-state pressure bonding model
Solid-state bonding is widely involved in metal forming and joining applications. The quality
of the bonded interface is the key to the final integrity of the joint or formed structure; thus, its …
of the bonded interface is the key to the final integrity of the joint or formed structure; thus, its …