The hot compression behavior of a 17-4 PH stainless steel (AISI 630) has been investigated
at temperatures of 950° C to 1150° C and strain rates of 10− 3 to 10 s− 1. Glass powder in …

Microstructure evolution in high-entropy alloy CoCrFeNiMn during uniaxial compression to a
height reduction of true strain of≈ 1.4 in the temperature interval 600–1100° C was studied …

The high-temperature deformation behaviors of low and medium carbon steels with
respectively 0.06 and 0.5 wt% C were investigated under strain rate and temperature ranges …

The hot deformation behavior of a 304 austenitic stainless steel was investigated to
characterize the evolution of the dynamically recrystallized structure as a starting point for …

Review ofdynamic recrystallization models isthe subject of the present work. Development of
both mean field and full field approaches during last three decades is presented and …

Although the austenitic stainless steels 304 and 321 are often treated nominally as
equivalents in their hot rolling characteristics, the question remains whether any subtle …

The kinetics of dynamic recrystallization (DRX) during hot compression of 304 austenitic
stainless steel was studied over the temperature range of 900-1200° C and strain rate range …

Dynamic abnormal grain growth (DAGG) is a newly discovered phenomenon which can be
used to produce large single crystals from polycrystalline material in the solid state at …

The effect of initial grain size on the recrystallization behavior of a type 304 austenitic
stainless steel during and following hot deformation was investigated using hot torsion. The …

The hot deformation behaviour and interfacial microstructure evolution have a critical
influence on the hot workability and mechanical properties of bimetal composite. This study …