The viscosity of molten metals is a critical parameter influencing melt fluidity, alloy forming
quality, and casting performance. It is therefore essential to maintain melt viscosity within an …

In this study, a composite deformation strategy of pre-kinking (equal channel angular
pressing (ECAP)) followed by large-ratio hot extrusion (HE) was designed to refine the 18R …

It is a long-term challenge to further improve the corrosion resistance while ensuring the
strength of magnesium (Mg) alloys. Revealing the effect of potential fluctuation on the micro …

Investigations on the fabrication of large-size lightweight Mg alloy components by wire-arc
directed energy deposition (DED) are steadily flourishing. Nevertheless, most of these …

Abstract A low-alloyed Mg-1.2 Zn-0.1 Ca (wt.%) alloy was fabricated via low-temperature
extrusion and annealing at 250° C for different times (10, 30, and 90 min) to attain …

The microstructure and mechanical performance of the unidirectionally and cross-
directionally rolled Mg-8Li-6Zn-1Y (in wt.%) sheets have been investigated and compared. It …

Abstract As-extruded Mg-Er-Ni alloys with different volume fractions of long-period stacking
ordered (LPSO) phase and density of lamellar γ′ phase were prepared, and the …

This work investigates the relationship between grain structure and corrosion behaviors of
extruded Mg-Sm-Zn-Zr alloys. The results show that the phase composition and distribution …

In this work, a prediction model, which can be used to reveal the corrosion mechanism and
behavior of Mg-RE-Ni alloys, was successfully developed with machine learning. The model …

Precipitation-hardenable commercial Mg alloy QE22 (Mg-2.5 Ag-2.0 Nd-0.7 Zr, wt.%) has
excellent mechanical properties, but precipitates in this alloy have not been well understood …