The compression behavior of hollow architectured structures obtained by additive
manufacturing was investigated in this work. Two face-centered cubic structures with the …

Metal forming is not only shaping the form of a product, it is also influencing its mechanical
and physical properties over its entire volume. Advanced analysis methods recently enable …

To better understand the influence of Fe-rich intermetallics on solidification defect formation,
fast in situ synchrotron X-ray tomographic microscopy experiments were performed on a …

In this paper, the research status of equal channel angular pressing (ECAP) in the
preparation of ultrafine grained magnesium alloy is introduced. The research results in …

Solidification cracking is a key phenomenon associated with defect formation during
welding. To elucidate the failure mechanisms, solidification cracking during arc welding of …

Central damage is a serious defect in the solid products of cross wedge rolling. A combined
experimental and modelling approach was used to study the micro-mechanism of central …

This paper addresses the impact of adding 0.14 wt% of vanadium to a fine-grained DP1300
steel, particularly in terms of damage and ductility. Variants with and without V were heat …

Micromechanical constitutive parameters are important for many engineering materials,
typically in microelectronic applications and material design. Their accurate identification …

The present paper addresses the challenge of conducting Finite Element (FE)
micromechanical simulations based on 3D X-ray data, and quantifying errors between …

The study of mushy-zone deformation in steels is important for limiting defect formation in
continuous casting. Here, we use in situ synchrotron radiography to quantify the shear …