Nuclear energy is a low-carbon, safe, efficient, and sustainable clean energy. The new
generation of nuclear energy systems operate in harsher environments under higher …

In this work, a fully coupled thermo-mechanical meshfree approach is developed for the first
time to simulate a solid-state layer-by-layer additive manufacturing process, Additive Friction …

Vacuum roll cladding (VRC) based on friction stir welding (FSW) is applied to prepare
aluminum alloy thick plates, and the effect of rolling reduction ratios (60%, 70%, 80%) on the …

The interface healing mechanism of fine-grained Ni–Co-based superalloy during hot-
compression bonding (HCB) is investigated. During HCB, the incompatibility of deformation …

The influence of surface roughness on the interfacial dynamic recrystallization kinetics and
mechanical properties of Ti-6Al-3Nb-2Zr-1Mo hot-compression bonding joints was …

The vacuum hot pressing bonding test of 2A12 aluminum alloy were performed under
different temperatures (with 17.5% deformation). The microstructure evolution was …

The joining of CNT/Al composites is a technology bottleneck in its engineering application.
In this study, a bonding method of ultrafine-grained CNT/Al–4Cu–1Mg composites was …

The oxide layer on the surface has always been a key obstacle to achieving the diffusion
bonding of Al alloys. It is a challenge for performing diffusion bonding without removing …

As an advanced solid state bonding process, plastic deformation bonding (PDB) is a highly
reliable metallurgical joining method that produces significant plastic deformation at the …

The interface oxides' morphologies, compositions and structures of 316 L/Q235 stainless
steel clad plate with different vacuum degrees of 10 5, 400, 10 and 10− 2 Pa were …