The slip/twinning activity and cracking behavior of an extruded Mg-3Y sheet during strain-
controlled tension-compression low-cycle fatigue (LCF) at room temperature were studied …

High-speed grinding technology is being applied to the precision machining of 20CrMnTi
steel gears, shafts and bearings suffering from fatigue damage. The response surface …

Evaluating corrosion fatigue crack propagation (CFCP) behaviour in different micro-regions
of steel/aluminium welded joints is crucial for ensuring the safety and reliability of these …

The fatigue properties of martensitic steels are highly microstructure-dependent, preventing
the use of fatigue design criteria for ordinary steels, thus hindering their widespread …

The present study deals with fatigue crack propagation and fatigue limit properties of two
precipitation-hardened steels. One steel is more susceptible to strain localization than other …

Suspended silt particles in natural water inevitably enter open water hydraulic systems,
challenging the tribological performance of materials and complicating the selection of …

Precipitation particles in precipitation-strengthened materials are considered to be cut by pre-
strain treatment, which affects the fatigue strength. In this study, fatigue tests were performed …

Fatigue strength of Ni-based superalloy 718 was investigated relative to shear-mode crack-
growth thresholds, to evaluate the influence of crack-opening/-closing stresses …

Fatigue strength of precipitation-hardened materials is well known to be lower than that
expected from their high yield and tensile strengths. To elucidate the reasons behind such …

Failure in a turbo-expander Tie-Bolt (stud) made of superalloy A-286 was investigated. The
evaluation of the chemical composition and tensile properties confirmed compliance with the …