In this study, the effect of post-weld heat-treatment (PWHT) on the interface microstructure
and its mechanical properties in the three-layered explosive welded (EXWed) …

In the current research, microstructure evolution and mechanical properties of multilayer
Cu/Al/Cu explosive welded joints were studied at upper and lower interfaces after heat …

The effects of heat treatment on the microstructure and mechanical properties of intermetallic
compounds in the interface of stainless steel 321 explosively bonded to aluminum 1230 …

The effects of postweld heat treatment on the microstructure and metallurgical properties of a
bronze–carbon steel (st37) explosively bonded interface were studied. Explosive welding …

In this research, the effect of stand-off distance on the interfacial mechanical and
metallurgical properties of explosively bonded 321 austenitic stainless steel to 1230 …

Inconel 625 and steel P355NH were bonded by explosive welding in this study. Explosively
welded bimetal clad-plate was subjected to the two separated post-weld heat treatment …

The present work aimed at studying the microstructure and mechanical properties of
Ck60/St37 composite plates fabricated by explosive cladding. The explosive ratio and stand …

Two types of titanium/steel composite plates with the same thickness were manufactured by
parallel explosive welding and double vertical explosive welding and rolling, respectively …

To further enhance the mechanical characteristics of the induction pressure welding (IPW)
joint, the heat treatment was carried out for the IPW joint of A283GRC steel and 5052 …

The paper presents the microstructure and phase composition of the interface zone formed
in the explosive welding process between technically pure aluminum and nickel. Low and …