Abstract Direct-Ink-Writing (or robocasting) is a subset of extrusion-based additive
manufacturing techniques that has grown significantly in recent years to design simple to …

In this work, the key role of colloid chemistry in the development of novel processing routes
for ceramic manufacture is reported. An overview of the origins of a ceramic processing …

The application of the gelling properties of some polysaccharides in the consolidation of
ceramics (gel casting) allows the forming of dense complex‐shape samples through …

Mass loss, shrinkage, Young's modulus evolution and stress development of aqueous
(alumina+ latex) tape cast suspensions were observed during drying. Mass loss showed a …

Tape casting process was used to produce yttria stabilized zirconia (YSZ) substrates in an
aqueous system with poly (vinylalcohol)(PVA) and glycerine as binder and plasticizer …

Tape casting has been reported as a suitable method for the preparation of ceramic layers
on supports for the manufacture of electronics. This technique can also be used to prepare …

Ceramic suspension is a basic ingredient for various ceramic processing, and designing a
ceramic suspension system is important to secure material processability in various …

TiC sheets were prepared by an aqueous tape‐casting process. The zeta potential
measurement showed that the isoelectric point for TiC powders in the absence of dispersant …

Ceramic wafers of alumina (Al 2 O 3) were produced by tape casting of aqueous slurry
followed by vacuum sintering. The binder system used to form the tape casting slurry is a …

Eco-friendly and sustainable tape casting of alumina powder suspensions using
concentrated natural rubber (poly isoprene) latex binder has been studied. The high …