Additive manufacturing of magnetic materials
V Chaudhary, SA Mantri, RV Ramanujan… - Progress in Materials …, 2020 - Elsevier
Additive manufacturing (AM) is an attractive process to manufacture net shape, complex,
engineering components with minimum waste; however, it has been largely applied to …
engineering components with minimum waste; however, it has been largely applied to …
Emerging opportunities in manufacturing bulk soft-magnetic alloys for energy applications: A review
Soft-magnetic alloys exhibit exceptional functional properties that are beneficial for a variety
of electromagnetic applications. These alloys are conventionally manufactured into sheet or …
of electromagnetic applications. These alloys are conventionally manufactured into sheet or …
Optimization and characterization of high velocity oxy-fuel sprayed coatings: techniques, materials, and applications
In this work High Velocity Oxy-fuel (HVOF) thermal spray techniques, spraying process
optimization, and characterization of coatings are reviewed. Different variants of the …
optimization, and characterization of coatings are reviewed. Different variants of the …
Thermal spray applications in electronics and sensors: past, present, and future
S Sampath - Journal of thermal spray technology, 2010 - Springer
Thermal spray has enjoyed unprecedented growth and has emerged as an innovative and
multifaceted deposition technology. Thermal spray coatings are crucial to the enhanced …
multifaceted deposition technology. Thermal spray coatings are crucial to the enhanced …
Characterization of mechanical properties of FeCrBSiMnNbY metallic glass coatings
JB Cheng, XB Liang, BS Xu, YX Wu - Journal of materials science, 2009 - Springer
This article investigates mechanical characteristics of Fe-based metallic glass coatings. A
series of the coatings were fabricated by conventional wire-arc spray process. The …
series of the coatings were fabricated by conventional wire-arc spray process. The …
Influence of annealing treatment on microstructure and magnetic properties of cold sprayed Ni-coated FeSiAl soft magnetic composite coating
Fully dense and thick Ni/FeSiAl soft magnetic composite deposits were successfully
fabricated by cold spraying (CS) using the Ni-coated FeSiAl composite powder. To improve …
fabricated by cold spraying (CS) using the Ni-coated FeSiAl composite powder. To improve …
A novel approach for fabricating Ni-coated FeSiAl soft magnetic composite via cold spraying
Currently, soft magnetic composites (SMCs) have attracted increasing attention due to their
outstanding magnetic properties, and various methods have been developed and applied …
outstanding magnetic properties, and various methods have been developed and applied …
In situ nanocrystalline Fe–Si coating by mechanical alloying
G Gupta, K Mondal, R Balasubramaniam - Journal of Alloys and …, 2009 - Elsevier
A new approach for deposition of in situ nanocrystalline Fe–Si alloy coating on mild steel
substrate by mechanical milling has been proposed. The thickness of nanocrystalline …
substrate by mechanical milling has been proposed. The thickness of nanocrystalline …
The influence of saccharin on the electrodeposition and properties of Co–Ni alloy thin films
S Tebbakh, Y Messaoudi, A Azizi… - Transactions of the …, 2015 - Taylor & Francis
Co–Ni alloys thin films were electrodeposited on Ru substrates from a chloride-saccharin
bath at pH 3.8 and the effects of adding saccharin to the bath on the electrochemical …
bath at pH 3.8 and the effects of adding saccharin to the bath on the electrochemical …
[HTML][HTML] 铁基非晶涂层的研究进展
梁秀兵, 程江波, 冯源, 陈永雄, 徐滨士 - 材料工程, 2017 - html.rhhz.net
综述铁基非晶涂层的研究进展, 介绍典型的铁基非晶涂层合金体系及分类,
重点讨论热喷涂和激光熔覆制备铁基非晶涂层技术的现状, 进展和发展趋势 …
重点讨论热喷涂和激光熔覆制备铁基非晶涂层技术的现状, 进展和发展趋势 …