Two-dimensional (2D) nanomaterials are sheet-like crystalline solids exhibiting remarkable
electrical, chemical, mechanical and optical properties. The emergence of 2D nanomaterials …

In this study, the change in the chemical properties of the thermally modified eucalyptus
(Eucalyptus camaldulensis) wood boards were examined by wet chemical analysis and …

The aim of this study was to investigate the effect of the thermal modification process by hot-
press on the wettability and surface roughness characteristics of the eucalyptus wood …

This study investigated the effects of densification and heat post-treatment on the Janka
hardness and microscopic structure of relatively low-density Uludag fir, linden, and black …

The thermal conductivity and porosity of fiberboard mats are crucial parameters for efficient
energy consumption of the hot-pressing process and for final panel quality. In this work, the …

Densification of wood is a method to improve wood quality. However, its product namely
densified wood, tends to return to the initial shape and size (spring back) if the fixation had …

The goal of this study was to investigate the effects of thermal modification by hot-pressing
on the performance properties of paulownia wood boards. The boards were thermally …

The study examined the influence of ultraviolet radiation on the colour of thermo-
mechanically modified beech (Fagus sylvatica) and oak (Quercus robur). The wood colour …

Fluctuations in cell densities are common in the secondary xylem of gymnosperms from the
lower Permian of Maranhão, northeastern Brazil, but they lack any distinct annual growth …

The effects of mechanical densification on density, Brinell hardness, bending strength
(MOR), modulus of elasticity (MOE), and compression strength (CS) of thermally pretreated …