A novel perception toward welding of stainless steel by activated TIG welding: a review
Stainless steel is a widely used material in various industries such as aerospace, chemical
processing and transportation. Tungsten Inert Gas (TIG) or Gas Tungsten Arc Welding …
processing and transportation. Tungsten Inert Gas (TIG) or Gas Tungsten Arc Welding …
Development of activated tungsten inert gas welding and its current status: A review
This article attempts to compile a list of recent tungsten inert gas welding advancements
(TIG). TIG welding only allows for a few millimeters of penetration depth. This limitation of …
(TIG). TIG welding only allows for a few millimeters of penetration depth. This limitation of …
Analysis of mechanical properties and optimization of tungsten inert gas welding parameters on dissimilar AA6061-T6 and AA7075-T6 by a response surface …
MS Bin Reyaz, AN Sinha - Engineering Optimization, 2024 - Taylor & Francis
This study explores the influence of welding current, travel speed and gas flow rate on
response parameters including ultimate tensile strength (UTS), percentage elongation (PE) …
response parameters including ultimate tensile strength (UTS), percentage elongation (PE) …
Study of microstructure and mechanical property relationships of A-TIG welded P91–316L dissimilar steel joint
The current work enunciated the effect of activating flux tungsten inert gas (A-TIG) welding
on the microstructural, mechanical and corrosion behaviour of the 316L stainless steel (SS) …
on the microstructural, mechanical and corrosion behaviour of the 316L stainless steel (SS) …
Study of mechanism, microstructure and mechanical properties of activated flux TIG welded P91 Steel-P22 steel dissimilar metal joint
The current work investigates activated flux TIG welding of dissimilar steel combination of 8
mm thick plates of Modified 9Cr-1Mo (P91) steel and 2.25 Cr-1Mo (P22) steel. The effect of …
mm thick plates of Modified 9Cr-1Mo (P91) steel and 2.25 Cr-1Mo (P22) steel. The effect of …
[HTML][HTML] Effect of process parameters on machinability, hemocompatibility and surface integrity of SS 316L using R-MRAFF
Surface finish at nanometric scale is imperative for biomedical implants made up of stainless
steel 316L (SS 316L) and titanium alloy to ensure the biocompatibility. However, such fine …
steel 316L (SS 316L) and titanium alloy to ensure the biocompatibility. However, such fine …
Study of arc characteristics using varying shielding gas and optimization of activated-tig welding technique for thick AISI 316L (N) plates
AR Pavan, N Chandrasekar, B Arivazhagan… - CIRP Journal of …, 2021 - Elsevier
In the present study, type 316L (N) bead-on-plates were welded using Activated-Tungsten
Inert Gas (A-TIG) welding process with argon and helium gas at various ratios to evaluate …
Inert Gas (A-TIG) welding process with argon and helium gas at various ratios to evaluate …
Microstructural and mechanical properties assessment of the P91 A-TIG weld joints
RS Vidyarthy, DK Dwivedi - Journal of Manufacturing Processes, 2018 - Elsevier
In the current work, the effects of CeO 2 and MoO 3 based activating flux on heat input, weld
bead geometry, and angular distortion during single pass A-TIG welding of the P91 steel …
bead geometry, and angular distortion during single pass A-TIG welding of the P91 steel …
Comparative study of activated flux-GTAW and multipass-GTAW dissimilar P92 steel-304H ASS joints
P Sharma, DK Dwivedi - Materials and Manufacturing Processes, 2019 - Taylor & Francis
In the present study, welding of P92 steel and 304H austenitic stainless steel (304H ASS)
plates (thickness: 8 mm) was performed using activated flux-gas tungsten arc welding …
plates (thickness: 8 mm) was performed using activated flux-gas tungsten arc welding …
Ultrasound-assisted deep eutectic solvent–based extraction of phytochemicals from Mentha arvensis: optimization using Box-Behnken design
In the present study, choline chloride–based solvents (eutectics of choline chloride with
ethylene glycol and malic acid) were prepared and used for the extraction of bioactive …
ethylene glycol and malic acid) were prepared and used for the extraction of bioactive …