Purpose Thin coatings are of great importance to minimize corrosion attack of steel in
different environments. A review of recent work on electrodeposition and corrosion …

Waste printed circuit boards (WPCBs) are a complicated and valuable fraction of electric and
electronic waste. The recycling of them is critical to avoid environmental pollutions and to …

Zn–Ni, Zn–Co and Zn–Ni–Co coatings were electrodeposited on mild steel from an acidic
chloride bath containing p-aminobenzenesulphonic acid (SA) and gelatin. These additives …

Zn–Fe, Zn–Ni and Zn–Ni–Fe coatings were electrodeposited galvanostatically on mild steel
from acidic baths (pH 3.5) consisted of ZnCl2, NiCl2, FeCl2, gelatin, sulfanilic (p …

Aqueous zinc–air batteries (ZABs) are a low‐cost, safe, and sustainable technology for
stationary energy storage. ZABs with pH‐buffered near‐neutral electrolytes have the …

To improve zinc coating performances in harsh environments, alloying Zn with other metals
is an alternative way to generate advanced alloys with better corrosion properties. Zn binary …

Zn–Ni alloy coatings were fabricated galvanostatically by applying varied current densities
from 10 to 30 mA cm− 2. Surface morphology of the coatings was examined with SEM …

Abstract Nanocrystalline Zn–Ni (crystallite sizes 13–68 nm) alloy coatings were produced
from an alkaline glycinate bath containing saccharin as additive. X-ray diffraction (XRD) was …

The development of Znsingle bondCo alloys appeared as alternative for obtaining layers
more resistant than the conventional zinc with a minimum increment of cost. The aim of this …

The influence of ultrasound agitation on the properties of electrodeposited Zn-Co coatings
was analysed and compared with coatings deposited by using magnetic stirring. The …