Polyvinyl chloride/polycarbonate blend ultrafiltration membranes for water treatment
In this study, PVC/PC blend membranes were prepared via NIPS methods. Characterization
techniques including FESEM, XRD, DSC, contact angle measurement, mechanical …
techniques including FESEM, XRD, DSC, contact angle measurement, mechanical …
Oil-in-water emulsion separation by PVC membranes embedded with GO-ZnO nanoparticles
Membrane technology is regarded as the most promising approach for oily wastewater
treatment. In this study, GO and GO-ZnO nanoparticles were incorporated into PVC …
treatment. In this study, GO and GO-ZnO nanoparticles were incorporated into PVC …
Preparation and characterization of TiO2 embedded PVC ultrafiltration membranes
In this study, polyvinyl chloride membranes embedded with TiO 2 nanoparticles were
prepared via non-solvent induced phase separation method. The results of FESEM showed …
prepared via non-solvent induced phase separation method. The results of FESEM showed …
Incorporation of silica grafted silver nanoparticles into polyvinyl chloride/polycarbonate hollow fiber membranes for pharmaceutical wastewater treatment
Polyvinyl chloride/polycarbonate hollow fiber membranes incorporated with modified silver
nanoparticles were prepared by wet spinning method. Fabricated membranes were then …
nanoparticles were prepared by wet spinning method. Fabricated membranes were then …
Effect of surface charge and roughness on ultrafiltration membranes performance and polyelectrolyte nanofiltration layer assembly
In this study, negatively charged Polyethersulfone (PES)/Polyimide (PI) ultrafiltration
membranes were fabricated in order to enhance membrane performance. Moreover, the …
membranes were fabricated in order to enhance membrane performance. Moreover, the …
Development of high flux photocatalytic agcl-cooh-mwcnt/pes ultrafiltration membranes for enhanced waste water treatment and fouling mitigation
B Zhao, Z Zhang, W Wang, X Yang, C Zhao… - Separation and …, 2025 - Elsevier
A structurally stable AgCl-COOH MWCNT/PES composite membrane was designed and
fabricated by combining phase conversion and post-treatment techniques, which can solve …
fabricated by combining phase conversion and post-treatment techniques, which can solve …
High‐density polyethylene membranes embedded with carboxylated and polyethylene glycol‐grafted nanodiamond to be used in membrane bioreactors
In this work, neat and modified nanodiamond (ND) particles were embedded into high‐
density polyethylene (HDPE) membranes to improve hydrophilicity and antifouling …
density polyethylene (HDPE) membranes to improve hydrophilicity and antifouling …
Fabrication of polysulfone nanocomposite membranes with silver‐doped carbon nanotubes and their antifouling performance
In this study, polysulfone (PSf)/silver‐doped carbon nanotube (Ag‐CNT) nanocomposite
membranes were prepared by a phase‐inversion technique; they were characterized and …
membranes were prepared by a phase‐inversion technique; they were characterized and …
[HTML][HTML] New insight of hybrid membrane to degrade Congo red and Reactive yellow under sunlight
A Rajeswari, EJS Christy, A Pius - Journal of Photochemistry and …, 2018 - Elsevier
A study was carried out to investigate the degradation of organic contaminants (Congo red
and Reactive yellow-105) using cellulose acetate-polystyrene (CA-PS) membrane with and …
and Reactive yellow-105) using cellulose acetate-polystyrene (CA-PS) membrane with and …
Study on the fouling behavior of HDPE/PE-g-MA/EVA blend membrane fabricated via thermally induced phase separation method
In this study, neat HDPE and HDPE/PE-g-MA/EVA blend membranes were fabricated via
thermally induced phase separation (TIPS) method and their fouling behaviors were …
thermally induced phase separation (TIPS) method and their fouling behaviors were …