Testing mechanical performance of adhesively bonded composite joints in engineering applications: an overview
The development of new adhesives has allowed to expand the application of bonding into
the most diverse industrial fields. This review article presents the commonly used …
the most diverse industrial fields. This review article presents the commonly used …
On cohesive element parameters and delamination modelling
The cohesive element (CE) has been widely used to model delamination in laminated
composites. The penalty stiffness, interfacial strength and fracture toughness are three CE …
composites. The penalty stiffness, interfacial strength and fracture toughness are three CE …
Accurate simulation of delamination under mixed-mode loading using a cohesive model with a mode-dependent penalty stiffness
The cohesive zone model approach in conjunction with a damage formulation, has been
used by many authors to simulate delamination using finite element codes. However, some …
used by many authors to simulate delamination using finite element codes. However, some …
[HTML][HTML] Mode I fracture analysis of Fe-SMA bonded double cantilever beam considering nonlinear behavior of the adherends
In the scope of developing a bonded iron-based shape memory alloy (Fe-SMA)
strengthening solution, nonlinear deformation in the adherends upon joint failure due to …
strengthening solution, nonlinear deformation in the adherends upon joint failure due to …
[HTML][HTML] Characterization and analysis of the interlaminar behavior of thermoplastic composites considering fiber bridging and R-curve effects
Thermoplastic composites can enable the development of new manufacturing techniques to
make the aviation industry more sustainable while at the same time greatly benefit cost …
make the aviation industry more sustainable while at the same time greatly benefit cost …
Superior interfacial toughening of hybrid metal-composite structural joints using 3D printed pins
T Bagnato, AR Ravindran, A Mirabedini… - Composites Part A …, 2023 - Elsevier
An experimental investigation is presented into the enhancement of interfacial toughness
properties of hybrid titanium-to-composite structural joints using 3D printed metal pins …
properties of hybrid titanium-to-composite structural joints using 3D printed metal pins …
Effect of the cohesive law shape on the modelling of adhesive joints bonded with brittle and ductile adhesives
J Zhang, J Wang, Z Yuan, H Jia - International Journal of Adhesion and …, 2018 - Elsevier
Abstract Cohesive Zone Models (CZMs) have been increasingly used for the fracture
prediction of adhesively bonded joints. In order to better understand the relation between the …
prediction of adhesively bonded joints. In order to better understand the relation between the …
Reconstruction and prediction of Mode-I cohesive law using artificial neural network
Cohesive zone model (CZM) is a widely used tool for simulating both static and fatigue
damage propagation for bonded area in composite materials. Under static loading, the …
damage propagation for bonded area in composite materials. Under static loading, the …
[HTML][HTML] Energy release rate in bimaterial specimens tested in pure modes I and II
New closed-form analytical expressions of the energy release rate of a bimaterial cracked
specimen are derived, when it experiences pure mode I in an asymmetric double cantilever …
specimen are derived, when it experiences pure mode I in an asymmetric double cantilever …
A novel experimental procedure to determine the cohesive law in ENF tests
This study presents a novel method to determine the mode II cohesive law of unidirectional
carbon fiber reinforced polymer laminates, employing the End Notched Flexure (ENF) test …
carbon fiber reinforced polymer laminates, employing the End Notched Flexure (ENF) test …