Inconel 718 is a nickel-ferrous-chromium based superalloy extensively used in the
aerospace sector at elevated temperature up to 650° C due to its better mechanical …

This research work explores the weldability, structural integrity, mechanical properties, and
corrosion behavior of dissimilar welds of Monel 400 and AISI 316L developed by using …

Abstract Inconel 718 (IN-718) is a nickel-based alloy, mostly used in the aeroengine
applications due to its good mechanical strength and resistance to corrosion. However, it is …

This study introduces an innovative technique known as fast-frequency double pulse wire
arc metal additive manufacturing (FFDP-WAAM). This method employs periodic fluctuations …

Due to the low content of alloying elements and the lack of effective nucleation sites, the
fusion zone (FZ) of tungsten inert gas (TIG) welded AZ31 alloy typically exhibits undesirable …

As a newly-developed Mg-rare earth (Mg-RE) alloy, Mg-3Nd-3Gd-0.2 Zn-0.5 Zr (EV33) alloy
has been reported to show desirable mechanical properties. Further research on the …

The purpose of this work is to study the effect of shot peening on the mechanical
characteristics of welded plates which were performed by Submerged Friction Stir Welding …

This paper investigated the effect of post-weld heat treatment (PWHT) on microstructure
evolution and sulfide stress corrosion cracking (SSCC) behavior of the fusion boundary (FB) …

The dissimilar welding of Inconel 718 (IN-718) alloy and AISI 410 martensitic stainless steel
(MSS-410) is crucial in advanced gas turbines, and ultra-supercritical power plants to meet …

This investigation aims to study the influence of friction pressure (FRNP) on the evolution of
microstructure and tensile properties of Ti6Al4V alloy joints developed using linear friction …