[PDF][PDF] Investigation of the influence of Ni 2+ concentration for the obtaining of electroless Cu-Ni-P alloy coatings on the dielectric surface
M Georgieva - J. Chem. Technol. Metall., 2022 - journal.uctm.edu
The electroless deposition of copper uses a catalytic redox reaction between metal ions and
a dissolved reducer (usually formaldehyde) at high temperatures in an alkaline environment …
a dissolved reducer (usually formaldehyde) at high temperatures in an alkaline environment …
Preparation of Cu/ZrW2O8 structures by chemical deposition from formaldehyde-free solution
N Mirchev, D Lazarova, M Georgieva… - Transactions of the …, 2022 - Taylor & Francis
This paper presents the process of preparation and characterisation of chemically deposited
copper coatings on ZrW2O8 particles. The interest in this topic is driven by the possibility of …
copper coatings on ZrW2O8 particles. The interest in this topic is driven by the possibility of …
Study of a system for creating a statistical model of the electroless plating of Cu-Ni-P alloys
MG Georgieva - Transactions of the IMF, 2022 - Taylor & Francis
The electroless plating method is the most convenient for the metallisation of dielectrics.
During this statistical study of the process, complex relationships were found between the …
During this statistical study of the process, complex relationships were found between the …
Guidelines for Accurate in-House Electroplating and 3-D-Printing Processes Applied to mm-Wave Devices
A Tamayo-Dominguez… - IEEE Microwave and …, 2022 - ieeexplore.ieee.org
This letter details the metallization process of 3-D-printed WR-28 and WR-10 waveguides
using electroplating. The 3-D printing technique is stereolithography, so the printed parts are …
using electroplating. The 3-D printing technique is stereolithography, so the printed parts are …
Electroless copper deposition into anodic aluminium oxide on aluminum substrate
V Milusheva, M Georgieva, B Tzaneva… - 2018 IEEE XXVII …, 2018 - ieeexplore.ieee.org
In this work a technology for electroless copper deposition into nanoporous anodic
aluminium oxide on copper metalized aluminium substrate was realized. The immersion …
aluminium oxide on copper metalized aluminium substrate was realized. The immersion …
Electrochemical Study on Electroless Cu-Ni-P Alloy
MG Georgieva - 2022 XXXI International Scientific Conference …, 2022 - ieeexplore.ieee.org
In the present work, the process of electroless deposition of Cu-Ni-P alloy layers using liner
sweep voltammetry has been studied. The influence of temperature, pH of the electrolyte, as …
sweep voltammetry has been studied. The influence of temperature, pH of the electrolyte, as …