Recent trends in activated carbon fibers production from various precursors and applications—A comparative review
Activated carbon fibers (ACF) are relatively novel and by far one of the most important
fibrous carbon materials owing to their special characteristics such as fibrous structure, high …
fibrous carbon materials owing to their special characteristics such as fibrous structure, high …
[图书][B] Thermal degradation of polymeric materials
Thermal Degradation of Polymeric Materials, Second Edition offers a wealth of information
for polymer researchers and processors who require a thorough understanding of the …
for polymer researchers and processors who require a thorough understanding of the …
Thermal and structure analysis on reaction mechanisms during the preparation of activated carbon fibers by KOH activation from liquefied wood-based fibers
Y Huang, E Ma, G Zhao - Industrial Crops and Products, 2015 - Elsevier
In this study, wood-based fibers were used as raw materials to prepare activated carbon
fibers (ACFs) by carbonization at 500° C followed KOH activation at 850° C process. The …
fibers (ACFs) by carbonization at 500° C followed KOH activation at 850° C process. The …
Levoglucosan formation mechanisms during cellulose pyrolysis
Levoglucosan is one important primary product during cellulose pyrolysis either as an
intermediate or as a product. Three available mechanisms for levoglucosan formation have …
intermediate or as a product. Three available mechanisms for levoglucosan formation have …
Evolved gas analysis by mass spectrometry
S Materazzi, S Vecchio - Applied Spectroscopy Reviews, 2011 - Taylor & Francis
The analytical applications of the evolved gas analyses (EGAs) performed by mass
spectrometry for the period extending from 2005 to 2010 are collected in this review. By …
spectrometry for the period extending from 2005 to 2010 are collected in this review. By …
Wood biomass characterization by DSC or FT-IR spectroscopy
A Bryś, J Bryś, E Ostrowska-Ligęza, A Kaleta… - Journal of Thermal …, 2016 - Springer
The wood biomass obtained from four tree species: spruce, beech, willow and alder was
studied. Sawdust obtained by sawing of wood was dried in a convective dryer at 80° C …
studied. Sawdust obtained by sawing of wood was dried in a convective dryer at 80° C …
TG/FT–IR/MS study on thermal decomposition of polypropylene/biomass composites
E Părpăriţă, MT Nistor, MC Popescu, C Vasile - Polymer degradation and …, 2014 - Elsevier
Abstract Thermogravimetry/Fourier Transform Infrared Spectroscopy/Mass Spectrometry
(TG/FT–IR/MS) coupled methods were used to determine the mass loss and the main …
(TG/FT–IR/MS) coupled methods were used to determine the mass loss and the main …
[HTML][HTML] Characterization of pellets produced from extracted sawdust: effect of cooling conditions and binder addition on composition, mechanical and thermochemical …
Hot-water extraction (HWE) is a biomass processing method that offers an excellent
possibility to generate multiple value-added products. In this study, the pellets were …
possibility to generate multiple value-added products. In this study, the pellets were …
Production and characterization of biochar from three-phase olive mill waste through slow pyrolysis
A Hmid, D Mondelli, S Fiore, FP Fanizzi… - Biomass and …, 2014 - Elsevier
The influence of temperature and heating rate on the yield and properties of biochar derived
from pyrolysis of solid olive mill waste (pomace) was investigated. Three pyrolysis …
from pyrolysis of solid olive mill waste (pomace) was investigated. Three pyrolysis …
[HTML][HTML] Improved yield of carbon fibres from cellulose and kraft lignin
A Bengtsson, J Bengtsson, C Olsson, M Sedin… - Holzforschung, 2018 - degruyter.com
To meet the demand for carbon-fibre-reinforced composites in lightweight applications, cost-
efficient processing and new raw materials are sought for. Cellulose and kraft lignin are …
efficient processing and new raw materials are sought for. Cellulose and kraft lignin are …