The advent of cost effective printed smart devices has revolutionized the healthcare sector
by allowing disease prediction and timely treatment through non-invasive real time and …

Conductive inks have gathered increasing attention in the fabrication of next-generation
electronic devices because of their prominent compatibility and producibility. Recently …

Fabrication of devices by printing conductive interconnections on plastic substrates is of
growing interest. Currently, silver flakes are wildly used, however the high cost of silver …

The major challenges in producing highly electrically conductive copper films are the oxide
content and the porosity of the sintered films. This study developed a multilayer sintering …

The microstructure of printed Cu wirings fabricated from air‐stable Cu complex inks is
greatly modified by low‐temperature curing followed by intense pulsed light densification …

A novel approach to selective electroless deposition of metal on non-conductive substrates
was developed. Using an electroless copper process requires the non-conductive material …

Abstract A new Additive-Manufacturing (AM) or 3D printing concept is proposed to improve
the printing resolution for metal additive manufacturing in the frame of the SFA-AM project …

During decomposition of copper formate, a volatile intermediate is formed, that can be
utilized to fabricate conductive copper lines for electrical interconnections. By the method …

Selective metallisation of non-conductive materials is a manufacturing process which is
often used in the electronics industry to create printed circuit boards, radio-frequency …