[HTML][HTML] Role of omega phase evolution in plastic deformation of twinning-induced plasticity β Ti–12V–2Fe–1Al alloy
W Wang, X Zhang, W Mei, J Sun - Materials & Design, 2020 - Elsevier
The evolution of the ω phase and its role in plastic deformation in a twinning-induced
plasticity β Ti–12 V–2Fe–1Al alloy aged at 373–573 K have been studied in this work. The …
plasticity β Ti–12 V–2Fe–1Al alloy aged at 373–573 K have been studied in this work. The …
Microstructure evolution, mechanical properties, and corrosion behavior of novel Zr–Ti–V alloys
Abstract Effects of different V contents on microstructure and properties of Zr–Ti alloys are
systematically investigated in this study. Microstructure of as-cast alloys is characterized by …
systematically investigated in this study. Microstructure of as-cast alloys is characterized by …
A new thermodynamic modeling of the Ti–V system including the metastable ω phase
A new thermodynamic model based on the Einstein function with more physical significance
is used to describe the hcp, bcc, fcc, ω, liquid and amorphous phases for Ti and V from …
is used to describe the hcp, bcc, fcc, ω, liquid and amorphous phases for Ti and V from …
In-situ synchrotron X-ray diffraction investigation of martensite decomposition in Laser Powder Bed Fusion (L-PBF) processed Ti–6Al–4V
Laser powder bed fusion (L-PBF) processed Ti–6Al–4V components present two substantial
challenges: the presence of tensile residual stress and brittleness of the as-fabricated …
challenges: the presence of tensile residual stress and brittleness of the as-fabricated …
Morphological evaluation of β-Ti-precipitation and its link to the mechanical properties of Ti–6Al–4V after laser powder bed fusion and subsequent heat treatments
R Kühne, F Bittner, T Töppel, A Raßloff… - Materials Science and …, 2024 - Elsevier
The microstructural properties of additively manufactured Ti–6Al–4V depend strongly on the
heat treatment after Laser Powder Bed Fusion. Among others the evaluation of …
heat treatment after Laser Powder Bed Fusion. Among others the evaluation of …
Experimental Investigation and Thermodynamic Description of the Cu–Ti–V System
R Zuo, B Hu, Y Liu, Y Wang, B Li, X Lan - Metallurgical and Materials …, 2024 - Springer
The phase equilibria of the Cu–Ti–V system were investigated via key experiments coupled
with thermodynamic modeling. The isothermal sections at 600° C, 700° C, and 800° C were …
with thermodynamic modeling. The isothermal sections at 600° C, 700° C, and 800° C were …
Insight into Point Defects and Complex Defects in β-Mo2C and Carbide Evolution from First Principles
J Guo, Y Feng, C Tang, L Wang, X Qing, Q Yang… - Materials, 2022 - mdpi.com
In this paper, first principles method was adopted to investigate the point defects, Vanadium-
related defects and defect combinations (vacancy (V), substitutional (S) and/or interstitial (I)) …
related defects and defect combinations (vacancy (V), substitutional (S) and/or interstitial (I)) …
Influence of microstructure evolution during thermal aging on tensile properties of β-type Ti-12V-2Fe-Al alloy
W Wang, X Zhang, J Sun - MATEC Web of Conferences, 2020 - matec-conferences.org
The evolution of the ω phase and its influence on tensile properties in β Ti-12V-2Fe-1Al
alloys aged at temperature from 373 to 573 K were investigated. The results show that the …
alloys aged at temperature from 373 to 573 K were investigated. The results show that the …