Ceramics are usually composed of randomly oriented grains and intergranular phases, so
their properties are the statistical average along each direction and show isotropy …

Texture engineering offers an approach for achieving enhanced properties in bulk ceramics
by introducing crystallographic anisotropy. Recent developments on texture engineering …

In recent years, calcium has been a chosen alloying element as an alternative to rare‐earth
elements for developing creep‐resistant magnesium alloys, which find promising …

Magnesium matrix composites can overcome the limitations of magnesium and its alloys.
This paper investigates the effect of adding Al 2 O 3 microparticles on microstructure and …

Hot deformation behavior of a homogenized Mg–8Sn–1Al–1Zn (wt.%)(TAZ811) alloy was
investigated at the temperature range of 523–673 K and the strain rate of 0.33–10 s− 1 to …

Sintering of ceramics is known to suffer from homogeneity issues (of phase, microstructure,
etc.). The present work aims to provide a simple solution for the same via positioning the …

The current focus of research in Mg alloys is to develop wrought Mg‒based alloys suitable
for automotive applications. The challenges to be overcome are low strength, poor ductility …

Strain-hardening and warm deformation behaviors of extruded Mg–2Sn–0.5 Yb alloy (at.%)
sheet were investigated in uniaxial tensile test at temperatures of 25–250° C and strain rates …

Abstract The effect of silicon (0.2–0.8 wt%) addition on the hot working behavior and
deformation mechanisms of the Mg–3Sn–2Ca–0.4 Al (TX32–0.4 Al) alloy has been …

Hexagonal close-packed (HCP) metals, particularly Zirconium (Zr), Titanium (Ti), and
Magnesium (Mg) alloys, have attracted significant attention due to their unique properties …