In this study, the co-deformation behavior of Cu in an Al-Cu couple was evaluated. It is
observed that slip, twinning, and partial shear banding were responsible for deformation in …

In the present study, a dissimilar composite consisting of commercially pure aluminium and
70–30 brass alloy was manufactured using the accumulative roll bonding process. For …

In the present study, aluminum-matrix composites reinforced by multi-walled carbon
nanotubes (MWCNTs) were manufactured using the accumulative roll bonding (ARB) …

Abstract The properties of Al–Cu bimetallic composite are investigated employing the finite
element method to understand the nature of the composite materials under different loading …

Abstract Cu–Al 2 O 3/Cu laminated dual heterogeneous microstructure composites with
alternating coarse/fine grain distributions were prepared using a combination of …

In the present study, accumulative roll bonding is used to fabricate Al base composites with
the thickness of 1 mm. then, fracture toughness, mechanical properties and forming limit …

This study investigates an approach to enhance the strength and torsional angle, as well as
analyze the microstructure and mechanical properties of a multi-component Cu-based alloy …

In the present work, the aluminum-graphite metal matrix composites were fabricated via
accumulative roll bonding (ARB). The graphite powder particles of< 50 μm were introduced …

The exceptional texture evolution of an α-Brass alloy processed by accumulative roll
bonding is the main objective of the present study. The material was manufactured in …

This study explores a new method aimed at improving the strength, and torsional angle and
investigates the microstructure and mechanical properties of the alloy. Through high …