This comprehensive review provides detailed information on the work-hardening capability
and unique deformation mechanisms of high-entropy alloys (HEAs) at low temperatures …

Many applications with potential use of high entropy alloys (HEAs) involve thermo-
mechanical processing. The principal aim of this study is to elucidate the deformation …

Al 6061-B 4 C metal matrix composites were fabricated using a novel solid state additive
manufacturing technique of additive friction stir deposition (AFSD). Incorporation of B 4 C …

This study deals with the strain hardening capability of a nitrogen added FeMnCoCr high-
entropy alloy during room temperature tensile deformation with an emphasize on the …

Metallic materials or alloys consisting of single face-cubic centered (FCC) phases typically
face difficulties in obtaining high strength without sacrificing ductility. The introduction of …

Abstract Heat treatment of Mg10Gd-4Y-xZn-0.6 Zr (x= 0, 1, 2 wt%) alloys has been optimized
based on thermodynamic calculations and experiments. The phase transformations during …

In this work, the effects of strain rate on dynamic hot deformation behavior and
microstructure evolution of Fe-Mn-Cr-N steel were studied under quasi-static and dynamic …

The NiCoCrFeAlW eutectic high-entropy alloy exhibits a balanced combination of ductility
and strength. This study examines the microstructure evolution and mechanical properties of …

A complex concentrated alloy (CCA) with a nominal composition of Al 0.35 CoCrFeNi
(mol.%) was prepared by vacuum induction melting and tilt casting. The microstructure of the …

In this study, high-pressure torsion (HPT) processing is applied to the as-cast Al0.
5CoCrFeNi high-entropy alloy (HEA) for 1, 3, and 5 turns. Microstructural observations …