The numerical prediction of dimensional accuracy and mechanical performance of 3D-
printed structures can eliminate or reduce the need to perform trial-and-error …

In the present work, an experimental investigation is performed to study the influence of
process parameters on mechanical properties of tetra‐anti‐chiral auxetic structures …

Effects of the addition of hemp fiber particles on the compressive and flexural behaviors of
an industrially important amorphous thermoplastic, Acrylonitrile-Butadiene-Styrene (ABS) …

The present paper describes an experimental study on mechanical properties of additively
manufactured anti‐tetrachiral auxetic structures under shear and flexural loading …

Most experimental and numerical studies are limited to examining the effect of strain rate on
the compressive and tensile yield behavior of Acrylonitrile-Butadiene-Styrene (ABS), an …

Most studies have focused on determining optimal dimensions of metal-or composite-based
rectangular hollow sections (RHSs) by considering only the design requirement of strength …

Herein, acrylonitrile‐styrene‐acrylate copolymer (ASA) particles with different microstructure
were synthesized by emulsion polymerization and then used for toughening poly (styrene …

A satisfactory reproduction of three-point bending and impact test data of an industrially
important amorphous polymer, acrylonitrile-butadiene-styrene (ABS), in the context of finite …

This study addressed to determine the flexural properties of hybrid composite laminates
(HCAFRE) under the strain rate sensitivity. The hybrid composite laminate was formed as …

This study aimed at investigating the effects of hemp fiber particles with an approximate size
of 500 μm added at three various weight ratios including 1wt%, 5wt%, and 10wt%, on the …