Synthesis and characterizations of magnetite–borogypsum for radiation shielding
YY Çelen, A Evcin - Emerging Materials Research, 2020 - icevirtuallibrary.com
Nowadays, parallel to the increasing use of nuclear technology, radiation protection
becomes an important issue. The use of materials, such as (Pb) lead, has become standard …
becomes an important issue. The use of materials, such as (Pb) lead, has become standard …
Characteristics of boronized Ti6Al4V alloy using boric acid based boronizing mixture
Boronizing processes of Ti alloys are generally performed in atmosphere-controlled
furnaces. In this study, it is aimed to carry out boronizing process under atmospheric …
furnaces. In this study, it is aimed to carry out boronizing process under atmospheric …
[PDF][PDF] The Diffusion Coatings for Industrial Tool Application
M Drajewicz, A Przybyło, J Jopek, M Góral… - Manufacturing …, 2022 - mt.ujep.cz
The diffusion boriding process allows increasing the abrasion and corrosion resistance of
the majority of steel grades. The aim of this study was to determine the influence of the …
the majority of steel grades. The aim of this study was to determine the influence of the …
Preparation and wear resistance of B–Al co-permeation layers on TC4 titanium alloy surface
J Zhang, H Yuan, X Zheng, Y Tu, X Ran… - Materials Today …, 2024 - Elsevier
The surface of the TC4 titanium alloy was treated by B–Al co-permeation at 900, 1000, and
1100° C for 4 h using the powder pack co-cementation method. The microstructure …
1100° C for 4 h using the powder pack co-cementation method. The microstructure …
[PDF][PDF] NIOBIZED LAYERS PRODUCED ON TI-6AL-4V ALLOY AND THEIR MECHANICAL PROPERTIES.
In this work, the microstructural and mechanical properties of treated Ti-6Al-4V alloy were
investigated. Ekabor II boriding first treatment was carried out in this alloy for the formation of …
investigated. Ekabor II boriding first treatment was carried out in this alloy for the formation of …
A simultaneous improvement of both hardness and ductility of Ti-6Al-4V alloy by Nb addition
A Kaouka, H Allaf, MA Khamed… - Journal of Physics …, 2021 - iopscience.iop.org
Some mechanical properties of treated Ti-6Al-4V alloy such as micro hardness and ductility
were investigated. Ti-6Al-4V-xNb (x= 1, 2 and 5 wt.%) alloys were produced. The influence …
were investigated. Ti-6Al-4V-xNb (x= 1, 2 and 5 wt.%) alloys were produced. The influence …
A Teaching Method for the Natural Sciences
In this contribution, we will introduce a new method of teaching and learning for the natural
sciences (Biology, Physics, Chemistry) and Mathematics. The inventor and practical …
sciences (Biology, Physics, Chemistry) and Mathematics. The inventor and practical …
Structures and Mechanical Properties of Pure Titanium by Different Boriding and Nitriding Conditions
T Chen, S Koyama - Key Engineering Materials, 2022 - Trans Tech Publ
Structure and mechanical properties of pure titanium by combined processing of boriding
and nitriding with different processing temperatures in the heating furnace have been …
and nitriding with different processing temperatures in the heating furnace have been …
Investigation of thermal residual stress of borided steel: finite-element simulation
Y Kahraman - Emerging Materials Research, 2020 - icevirtuallibrary.com
Although a technologically interesting characteristic of boriding is the production of a hard,
wear-resistant layer on the treated steel parts, thermal residual stresses may lead to crack …
wear-resistant layer on the treated steel parts, thermal residual stresses may lead to crack …
Comparison of the Microstructure and Mechanical Properties of Ti-3573 and Ti-3873 Alloys after Cold Rolling and Aging Treatment
WH Cai, Z Li, KQ Lv, L Zhang - Materials Science Forum, 2021 - Trans Tech Publ
The novel titanium alloys were investigated in this article. The Ti-3573 and Ti-3873 titanium
alloys were cold rolled and aged for different times at 650° C. The microstructure and …
alloys were cold rolled and aged for different times at 650° C. The microstructure and …