EUROFER97 steel plates for nuclear fusion applications are usually manufactured by hot
rolling and subsequent heat treatments:(1) austenitization at 980° C for 30 min,(2) rapid …

The inter-critically reheated grain coarsened heat affected zone (IC GC HAZ) has been
reported as one of the most brittle section of high-strength low-alloy (HSLA) steels welds …

The deformation behavior of a hot roll-bonded stainless steel/carbon steel (STS/CS) clad
plate is investigated by focusing on the mechanical properties-microstructure relationship …

AISI 904L is a super-austenitic stainless steel that is remarkable for its mechanical
properties and high corrosion resistance, which strictly depend on its chemical composition …

The combination of hot working technologies with a thermal path, under controlled
conditions (ie, thermomechanical processing) provides opportunities to achieve required …

Rolling is one of the most important processes in the metallurgical industry due to its
versatility. Despite its inherent advantages, design and manufacturing by rolling still rely on …

Well-defined heat-treatment guidelines are required to achieve the target mechanical
properties in high-chromium steels for forgings. Moreover, for this class of materials, the …

A 9% Cr martensitic steel with Ta and B additions was subjected to thermo-mechanical
treatment (TMT) including rolling in the range of metastable austenite at 900–700° C …

Formability and its prediction of high-strength steels is an important research subject for
forming specialists and researchers in this field. Springback and its accurate prediction of …

Hydrate formation and dissociation processes were carried out in the presence of a pure
quartz porous medium impregnated with a metallic powder made with a CuSn12 alloy …