Grain boundary precipitates in Inconel 718 and ATI 718Plus are important to control during
hot working processes, since they can control the grain size. Precipitating excessive or …

The evolution of microstructure and mechanical properties of ATI 718Plus® superalloy
subjected to a graded solution treatment was evaluated. Graded solution treatment was …

In this paper, the microstructure evolution and tensile behavior of wrought ATI 718Plus
superalloy during long-term thermal exposure (LTTE) were investigated. The γ′ phase …

Wrought, as-cast, and homogenized sheets were welded using the tungsten inert gas (TIG)
process. The precipitates in both the base metal and the coarse-grained heat-affected zone …

Herein, the effects of microstructure on high-temperature properties (hot ductility and stress
rupture life) were investigated in alloy 718 investment castings manufactured with different …

Pulse dynamic electrochemical machining (PDECM) is an innovative electrochemical
machining technique that significantly enhances machining precision. It is considered a …

Hot ductility of the newly developed AD730™ nickel-base superalloy was investigated in the
temperature interval 1050–1240° C. The nil strength and nil ductility temperatures were …

The susceptibility to heat affected zone cracking of Waspaloy has been investigated in terms
of its hot ductility, measured as the reduction of area (RA). Gleeble testing with on-heating as …

The hot deformation behavior of 718Plus is modeled through a physically based hybrid
dislocation density model, which includes the effects of precipitating particles. It is well …

A study of the microstructural evolution of a Ni-based superalloy, Allvac 718Plus, in the
forged condition, was performed by varying the solutionizing temperature. Different …