Four different industrial filler metals were selected for the joining of AISI 304 austenitic to
AISI 409 ferritic stainless steel. These fillers were austenitic and duplex stainless steels and …

Isothermal (IF) and thermo-mechanical fatigue (TMF) tests were conducted on 316L welded
joints to investigate the effects of phase angle (in-phase (IP), clockwise-diamond (CD), and …

The aim of this work is to study the time dependent effects on the low cycle fatigue (LCF)
behavior of 316 L (N) stainless steel weld joint. Influence of strain rate, temperature, strain …

Dynamic strain ageing (DSA) in an austenitic Ni-based alloy was investigated by
symmetric/asymmetric low cycle fatigue tests with different strain amplitudes at 350° C. A …

The present work aims at studying the role of butter layer (BL) in low-cycle fatigue (LCF)
behavior of modified 9Cr steel and CrMoV steel dissimilar welded joint. The significant …

In this work, the multiaxial behaviour of 316 stainless steel is studied under the lens of
critical plane approach. A series of experiments were developed on dog bone–shaped …

The integrity of the nuclear reactor components must be guaranteed under operating and
emergency conditions at all times. All possible degradation mechanisms should be …

Fatigue influences steel structure and material properties and thus significantly influences
degradation mechanism and lifetime of steel. The determination of fatigue curves is …

Low cycle fatigue behaviour of Q345B steel and its smooth welded joint were experimentally
investigated in fully reversed strain-control at constant strain rate of 0· 005 s− 1. The cyclic …

This paper focused on the study of Low Cycle Fatigue of welded joints of superaustenitic
(Alloy28) stainless steels. Chemical composition and microstructure investigation of Base …