Influence of copper addition and temperature on the kinetics of austempering in ductile iron

Y Amran, A Katsman, P Schaaf… - Metallurgical and Materials …, 2010 - Springer
Austempered ductile iron (ADI) is a material that exhibits excellent mechanical properties
because of its special microstructure, combining ferrite and austenite supersaturated with …

Effect of copper on the crystallization process, microstructure and selected properties of CGI

G Gumienny, B Kacprzyk… - Archives of Foundry …, 2017 - yadda.icm.edu.pl
The paper presents the results of the research on the effect of copper on the crystallization
process, microstructure and selected properties of the compacted graphite iron. Compacted …

[PDF][PDF] Effect of chromium on the solidification process and microstructure of vermicular graphite cast iron

G Gumienny, M Dondzbach… - Archives of Foundry …, 2015 - bibliotekanauki.pl
The paper presents the results of studies of the effect of chromium concentration on the
solidification process, microstructure and selected properties of cast iron with vermicular …

The Austempering Kinetics, Microstructural Development, and Processing Window in the Austempered, Fe-3.2 C-4.8 Al Compacted Graphite Cast Iron.

A Kazazi, SM Montazeri… - Iranian Journal of …, 2020 - search.ebscohost.com
In the present study, austempering heat treatment was performed on compacted graphite
aluminum cast iron with the chemical composition of 4.8 wt% Al, 3.2 wt% C, 0.81 wt% Ni …

Aluminium in compacted graphite iron

G Gumienny, B Kurowska, L Klimek - China Foundry, 2020 - Springer
Compacted graphite was obtained using inmold technology. The effect of aluminium on the
crystallization process, microstructure, ferrite microhardness, and hardness of compacted …

Quantitative analysis of austempering kinetics of ductile iron with Cu addition

Y Amran, A Katsman - Materials Science and Technology, 2013 - journals.sagepub.com
The kinetics of austempering of two ductile iron alloys, Fe–3· 5C–2· 5Si and Fe–3· 6C–2· 7Si–
0· 7Cu, was investigated. The alloys were austempered for various times at 623 K (350° C) …

Early Evidences on the Rotating Bending Fatigue Properties of Ductile and Vermicular Cast Irons

N Radovic, G Lesiuk, R Vujanac - Virtual Conference on Mechanical …, 2020 - Springer
Cast iron probably represents one of the most widely utilized constructive materials in our
modern industrial world. This is due not only to the excellent mechanical and tribological …