In this study, the addition of Sn on the microstructure of Zn 1.6 wt.% Al 1.6 wt.% Mg alloy was
studied. Currently, the addition of Sn into Zn-Al-Mg based systems has not been investigated …

Pure Zn is well-known for its appropriate corrosion rate, making it suitable for use as future
absorbable implants. Yet, it suffers from insufficient strength, thus, both plastic deformation …

Corrosion behaviour of Sn (0.0, 0.5, 1.0, 2.0 and 3.0 wt.%)-doped Zn 1.6 wt.% Al 1.6 wt.%
Mg alloys exposed to salt spray testing was investigated. Intergranular corrosion was …

The present study investigates the effects of Al content and solidification thermal parameters
on the microstructural development under transient heat flow conditions for two …

ZnMg alloys of certain compositions in the Zn-rich side of the phase diagram are particularly
efficient, and widely used, as anticorrosive coatings, but a sound understanding of the …

This work deals with the development of quantitative correlations of hydrogen evolution
performance with solidification microstructural and thermal parameters in Al–1Sn, Al–2Sn, Al …

The development of biodegradable Zn-based alloys for implants that effectively mimic the
functionality of native bone throughout the healing process is a multifaceted challenge; this …

In electronic devices the solder joint is exposed not only to the air but also to moistures and
other corrosive media such as chlorine and sulfur compounds. Bi–Ag alloys meet the …