The microstructure, mechanical properties, and dynamic mechanical properties of the
various intermetallic-reinforced in-situ Al–Al 3 Ni eutectic composites were investigated for …

This research has studied the microstructure and mechanical and tribological properties of
AA2024 aluminum alloy matrix composite reinforced by Al 3 NiCu. The Al 3 NiCu …

AA5086-H116 plates were welded, with and without copper (Cu)-reinforcement, using
friction stir welding. Cu-reinforcement during the solid state welding process developed a …

An investigation is made on the effects of Cr addition (0.25 and 0.50 wt%) on the
solidification evolution, microstructure formation, hardness and tensile properties of Al–3.8 …

Despite a growing interest in additive manufacturing technologies, there is still a limited
selection of suitable materials developed regarding the unique non-equilibrium cooling …

Abstract Open-cell Al-4.5 Cu (wt.%) foams were produced by the replication casting
technique in cell sizes of 2.00–2.38 and 3.35–4.75 mm. The fabricated foams were …

Abstract High-strength Al2014 (Al2) and Al7075 (Al7) series composites with and without
addition of hexagonal BN (h-BN) flakes (1, 3, and 5 wt%) were fabricated from the powder …

Novel aluminum-copper compound castings devoid of oxide layers at the interface between
the joining partners were developed in order to increase the thermal conductivity of the …

The measurement of surface energy of alloy nanoparticles experimentally is still a challenge
therefore theoretical work is necessary to estimate its value. In continuation of our previous …

The synchronous hydrogen permeable and environment protective PEO alumina hydrogen
permeation barrier (HPB) coating was formed on aluminum-copper alloy hydrogen storage …