Graphite/Cu composite is widely used in pantograph slide plates. To further understand its
lubrication behaviors, the tribological properties of graphite/Cu composites with different …

In the past, microcrystalline graphite (MG) was mainly used for the preparation of carbon
enhancers and flame retardant, and is a low value-added inorganic mineral. There are very …

With the rapid development of modern science and industrial technology, single metals or
alloys are restricted by working conditions and cost. It is challenging to meet the …

Cu–Ni-graphite composite is intended to be used as switch slide baseplates in the high-
speed railways., The composite is modified by silver element to enhance the tribological …

Combining short-process reduction and vacuum hot pressing, copper matrix composites
with the graphite volume fraction of 55% and 70% were prepared by cuprous oxide and …

We review the fundamental properties and significant issues related to Cu/graphite
composites. In particular, recent research on the interfacial modification of Cu/graphite …

Ti3AlC2 three-layered ceramics-reinforced copper matrix composites show not only the
strength of the copper matrix but also better wear resistance, all while preserving its …

When the graphite/copper composite is used as an electronic packaging material, it is
difficult to take advantage of the thermal conductivity due to its poor interface bonding. In this …

Abstract graphene nano-platelets (GNPs) and α-Al 2 O 3w reinforced laminated Cu matrix
composites were successfully prepared by flake powders metallurgy (FPM) and vacuum hot …

Owing to good self-lubricating performance, tin bronze is widely used in industrial fields. As
tin bronze parts manufactured by powder metallurgy, their tribological performances are …