Solid-state lighting: A system review
C Branas, FJ Azcondo… - IEEE Industrial Electronics …, 2013 - ieeexplore.ieee.org
T his article presents the background on the development of solid-state lighting technology,
which is gaining popularity as a light source application. This review focuses on the main …
which is gaining popularity as a light source application. This review focuses on the main …
Effective low-cost hybrid LED-halogen solar simulator
An effective low-cost hybrid solar simulator combining LED sources and a low-voltage
halogen lamp to produce an output beam that can closely match a desired solar spectrum is …
halogen lamp to produce an output beam that can closely match a desired solar spectrum is …
A new technique to equalize branch currents in multiarray LED lamps based on variable inductors
RA Pinto, JM Alonso, MS Perdigão… - IEEE Transactions …, 2015 - ieeexplore.ieee.org
In this paper, a new technique to equalize light-emitting diode (LED) currents in multiarray
LED lamps is proposed. The current through the LEDs is controlled by changing the …
LED lamps is proposed. The current through the LEDs is controlled by changing the …
Comparative study of the photometric characteristics and the efficiency of a linear led luminaire with prismatic and opaque diffusers
P Tsankov, M Yovchev… - 2022 Seventh Junior …, 2022 - ieeexplore.ieee.org
Comparative study of the photometric characteristics and efficiency of an indoor application
linear LED luminaire with three variants of the optical system without secondary optic, with …
linear LED luminaire with three variants of the optical system without secondary optic, with …
Optimization Process Applied in the Thermal and Luminous Design of High Power LED Luminaires
This work proposes the design of an optimization method for high-power LED luminaires
with the introduction of new evaluation metrics. A luminaire geometry computational method …
with the introduction of new evaluation metrics. A luminaire geometry computational method …
Electrothermal methodology applied to flicker analysis in off-line LED systems
VC Bender, ND Barth, GC Flores… - IECON 2013-39th …, 2013 - ieeexplore.ieee.org
In this paper a study about LED (light-emitting diode) luminous flux performance using an
electrothermal methodology is presented. The objective is to evaluate and quantify the …
electrothermal methodology is presented. The objective is to evaluate and quantify the …
Understanding multi-domain compact modeling of light-emitting diodes
S KR - Cogent Engineering, 2021 - Taylor & Francis
The purpose of this work is to understand the theoretical aspects related to the compact multi-
domain (Optical, Electrical and Thermal) modeling of light-emitting diodes (LEDs). Prior …
domain (Optical, Electrical and Thermal) modeling of light-emitting diodes (LEDs). Prior …
Model predictive control for luminous flux tracking in light-emitting diodes
Luminous flux tracking and junction temperature stress minimization are typical objectives in
the regulation of high-brightness light-emitting diodes (LEDs). In this brief, a solution based …
the regulation of high-brightness light-emitting diodes (LEDs). In this brief, a solution based …
Electrothermal characterization applied to the study of chromaticity coordinates in RGB LEDs
WD Vizzotto, GG Pereira, R Cordeiro… - 2013 Brazilian …, 2013 - ieeexplore.ieee.org
The purpose of this paper is the development of a methodology to analyze the chromaticity
coordinates in RGB LEDs, considering the influence of junction temperature. A review of …
coordinates in RGB LEDs, considering the influence of junction temperature. A review of …
Metodologia de Projeto Eletrotérmico de LEDs Aplicada ao Desenvolvimento de Sistemas de Iluminação
Este trabalho apresenta uma metodologia de projeto eletrotérmico de diodos emissores de
luz (LEDs) que tem o objetivo de proporcionar indicativos do melhor ponto de operação do …
luz (LEDs) que tem o objetivo de proporcionar indicativos do melhor ponto de operação do …