Pure copper has excellent conductivity but low strength, which greatly limits its application in
many fields. In recent years, developing high-strength and high-conductivity (HSHC) copper …

The microstructure and properties of the Cu-6.5 Fe-xMg (x= 0, 0.1, 0.3, 0.5 wt%) alloy were
investigated by TEM (transmission electron microscopy), EBSD (electron backscattered …

Cu-Fe composites are a new generation of electromagnetic shielding materials. However,
the substructure evolution of the two-phase composite is not clear in the aging process, and …

The effect of Si on the microstructure and properties of Cu–10Fe alloy was systematically
studied in this paper. By adding 0.4 wt% Si to Cu–10Fe alloy, the mechanical properties …

The influence of minor Ag addition on microstructure and properties of powder metallurgy
Cu-10Fe alloy was investigated systematically. Minor Ag addition can give rise to finer and …

The effects of Zr addition on the solidification structure and mechanical properties of a Cu-10
wt% Fe alloy were investigated. Grain refinement results from the in-situ synthesis of the …

Simultaneous improvement of both the strength and electrical conductivity of Cu–Fe alloys
(CFAs) through the conventional casting method is an extremely challenging task. In this …

Abstract Cu-0.57 Cr-0.01 Ca and Cu-0.58 Cr-0.01 Sr (wt.%) alloys were fabricated and
processed by thermo-mechanical treatment. Their mechanical and electrical properties and …

Cu–10Fe composites were produced by the vacuum suction casting and traditional vacuum
mold casting, respectively. The evolution of microstructure and properties of the composites …

A near-full dense Cu-36.8 Fe alloy was manufactured by selective laser melting (SLM). The
as-SLMed Cu-Fe alloy exhibits an excellent combination of both high strength and superior …