Natural dyes as TIO2 sensitizers with membranes for photoelectrochemical water splitting: An overview

SNH Jaafar, LJ Minggu, K Arifin, MB Kassim… - … and Sustainable Energy …, 2017 - Elsevier
The development of titanium dioxide-based semiconductors has been widely studied due to
the efficiency of this material in photoelectrochemical water splitting. However, the large …

Pyrrole-containing semiconducting materials: synthesis and applications in organic photovoltaics and organic field-effect transistors

C Bulumulla, R Gunawardhana… - … applied materials & …, 2020 - ACS Publications
Organic semiconducting materials derived from π-electron-rich pyrroles have garnered
attention in recent years for the development of organic semiconductors. Although pyrrole is …

High performance field emitters

CM Collins, RJ Parmee, WI Milne… - Advanced Science, 2016 - Wiley Online Library
DOI: 10.1002/advs. 201500318 influence the field emitting capabilities of a material, when
the work function is the only comparative characteristic. Here the studied materials are …

Decent efficiency improvement of organic photovoltaic cell with low acidic hole transport material by controlling doping concentration

S Biswas, YJ You, J Kim, SR Ha, H Choi, SH Kwon… - Applied Surface …, 2020 - Elsevier
Abstract Presently, poly (3, 4-ethylenedi-oxythiophene): polystyrene sulfonic acid (PEDOT:
PSS) is most commonly used hole transport material (HTM) in photovoltaic (PV) cells but its …

Record High Efficiency Achievement under LED Light in Low Bandgap Donor‐Based Organic Solar Cell through Optimal Design

Y Lee, S Biswas, H Choi, H Kim - International Journal of …, 2023 - Wiley Online Library
Recently, a low bandgap donor named poly [4, 8‐bis (5‐(2‐ethylhexyl) thiophen‐2‐yl)
benzo [1, 2‐b: 4, 5‐b′] dithiophene‐2, 6‐diyl‐alt‐(4‐(2‐ethylhexyl)‐3‐fluorothieno [3, 4b] …

PEDOT: PSS in water and toluene for organic devices—Technical approach

B Jewłoszewicz, KA Bogdanowicz, W Przybył, A Iwan… - Polymers, 2020 - mdpi.com
Poly (3, 4-ethylenedioxythiophene: poly (styrenesulfonate)(PEDOT: PSS) water and toluene
solutions were investigated in detail, taking into consideration their stability, wettability …

sEMG sensor using polypyrrole-coated nonwoven fabric sheet for practical control of prosthetic hand

Y Jiang, M Togane, B Lu, H Yokoi - Frontiers in neuroscience, 2017 - frontiersin.org
One of the greatest challenges of using a myoelectric prosthetic hand in daily life is to
conveniently measure stable myoelectric signals. This study proposes a novel surface …

PEIE capped ZnO as cathode buffer layer with enhanced charge transfer ability for high efficiency polymer solar cells

P Li, L Cai, G Wang, J Xiang, YJ Zhang, BF Ding… - Synthetic Metals, 2015 - Elsevier
In this work, a cathode buffer layer (CBL) with higher charge transfer ability was fabricated
by using polyethylenimine ethoxylated (PEIE) covered ZnO nanoparticles (NPs)(ZnO/PEIE) …

Nanopaper‐based organic inkjet‐printed diodes

S Conti, C Martínez‐Domingo, M Lay… - Advanced Materials …, 2020 - Wiley Online Library
The rise of internet of things (IoTs) applications has led to the development of a new
generation of light‐weight, flexible, and cost‐effective electronics. These devices and …

Enhanced power conversion efficiency in bulk heterojunction solar cell based on new polyazomethine with vinylene moieties and [6, 6]-phenyl C61 butyric acid methyl …

A Iwan, B Boharewicz, I Tazbir, M Filapek - Electrochimica Acta, 2015 - Elsevier
Abstract A polyazomethine (PPV-PAZ-DMB) containing vinylene and aliphatic side chains
was synthesized by polycondensation method. The structure of polymer was characterized …