With the development of thermoelectric (TE) materials and devices, there has been an
increasing demand for establishing a reliable connection at the interface of TE …

Due to the complex principle of transverse thermoelectric conversion and the specific
preparation technique, there are few studies on the three-dimensional structure of artificially …

Bismuth telluride-based thermoelectric generators (TEG) were widely used in the clean
recovery of waste heat, but frequent failure problems at the hot-end electrode interface …

Abstract Background Bi 2 Te 3 is the most frequently used thermoelectric compound, while
Co exhibits promise as a barrier layer candidate. To provide fundamental information, the Bi …

Bismuth telluride-based thermoelectric devices have attracted much attention in the field of
low-quality waste heat recovery below 200° C. However, the rapid diffusion at the interface …

Interdiffusion and solid–solid phase reaction at the interface between thermoelectric (TE)
materials and the electrode critically influence interfacial transport properties and the overall …

Bismuth telluride-based thermoelectric generators (TEG) were widely used in waste heat
recovery, but the failure problem at the electrode interface was serious, which was related to …

Bismuth telluride-based thermoelectric (TE) devices were widely used in waste heat
recovery due to their high thermoelectric figure of merit (ZT), but the severe diffusion …

Abstract The binary Cu-Be alloy features high elasticity and yield strength. Hence, it can be
used as an electrode material for bulk Bi 2 Te 3-based thermoelectric (TE) devices to create …

Flexible thermoelectric generators (FTEGs), which can overcome the energy supply
limitations of wearable devices, have received considerable attention. However, the use of …