Characterization of heat treated wood species
T Priadi, S Hiziroglu - Materials & Design, 2013 - Elsevier
The objective of this work is to investigate the effect of heat treatment on swelling, hardness
and surface quality of samples from four species, namely mindi (Melia azedarch L.) …
and surface quality of samples from four species, namely mindi (Melia azedarch L.) …
Studies on laminated and scrimber composites produced from thermally modified D. strictus bamboo bonded with melamine-based adhesive
Bamboo culms of Dendrocalamus strictus (Roxb.) were subjected to thermal modification at
different treatment temperatures of 160, 180 and 200° C under partial vacuum. Control and …
different treatment temperatures of 160, 180 and 200° C under partial vacuum. Control and …
[HTML][HTML] Chemical characterization and ftir spectroscopy of thermally compressed eucalyptus wood panels
O Gonultas, Z Candan - Maderas. Ciencia y tecnología, 2018 - SciELO Chile
In this study, the change in the chemical properties of the thermally modified eucalyptus
(Eucalyptus camaldulensis) wood boards were examined by wet chemical analysis and …
(Eucalyptus camaldulensis) wood boards were examined by wet chemical analysis and …
Effects of short-term thermomechanical densification on the structure and properties of wood veneers
P Bekhta, S Proszyk, T Krystofiak… - … material science & …, 2017 - Taylor & Francis
The effects of short-term thermomechanical (STTM) densification temperature and pressure
on the changes in surface roughness, wettability, mass loss (ML), thickness and density of …
on the changes in surface roughness, wettability, mass loss (ML), thickness and density of …
Gloss of thermally densified alder (Alnus glutinosa Goertn.), beech (Fagus sylvatica L.), birch (Betula verrucosa Ehrh.), and pine (Pinus sylvestris L.) wood veneers
P Bekhta, S Proszyk, B Lis, T Krystofiak - European Journal of Wood and …, 2014 - Springer
Thermo-mechanical densification of wood is performed to improve physical and mechanical
properties of wood. During this treatment aesthetic properties of wood, including gloss, also …
properties of wood. During this treatment aesthetic properties of wood, including gloss, also …
[HTML][HTML] Prediction of surface roughness of CO2 laser modified poplar wood via response surface methodology
Due to the advantages of short treatment period, no wastewater and oil produced, the CO 2
laser is applied as an environment friendly thermal treatment for wood materials to improve …
laser is applied as an environment friendly thermal treatment for wood materials to improve …
Some properties of plywood panels manufactured from combinations of thermally densified and non-densified veneers of different thicknesses in one structure
In this study, the effects of veneer thickness, the combination of different veneer thicknesses
as well as non-densified and densified veneers with the same plywood structure, and …
as well as non-densified and densified veneers with the same plywood structure, and …
The effect of veneer densification temperature and wood species on the plywood properties made from alternate layers of densified and non-densified veneers
In this study the properties of plywood manufactured from densified and non-densified
veneer sheets and alternate layers of such veneers with and without densification using low …
veneer sheets and alternate layers of such veneers with and without densification using low …
Wettability and roughness characteristics of modified wood boards using a hot-press
The aim of this study was to investigate the effect of the thermal modification process by hot-
press on the wettability and surface roughness characteristics of the eucalyptus wood …
press on the wettability and surface roughness characteristics of the eucalyptus wood …
Wettability and surface roughness of thermally modified plywood panels
The objective of this research was to investigate the wettability and surface roughness
properties of the plywood panels under thermal modification. The plywood panel specimens …
properties of the plywood panels under thermal modification. The plywood panel specimens …