Rotary friction welding (RFW) has proved to be a successful joining technology in advanced
materials manufacturing. The highly transient thermal responses during friction heating …

Couples of AISI 304L and AISI 1040 steels were welded using the continuous-drive friction-
welding process. The welded joints were manufactured using three different rotational …

The aim of this study is to investigate the effect of rotational speed on the microstructure and
mechanical properties of friction welded 2014 aluminum alloy. The experimental results …

Fe–28Al alloy and 316 L stainless steel were welded by the friction welding technique.
Friction time and friction pressure were selected as variable parameters. Microstructures of …

17 4-PH paslanmaz çelik ve Al 7075 T6 alaşımı özel bir firmadan temin edilmiştir.
Numuneler kaynak işlemi için uygun boyutlarda işlenmiştir. Sürtünme kaynağı işlemi, 1000 …

Friction welding is widely used as a mass production method in various industries. In friction
welding, the joints are formed in the solid state by utilizing the heat generated by friction …

Friction welding of cast Fe-40Al alloy was carried out at 1000 rmp for various friction times,
friction pressures, and forging pressures. The microstructures of the interface of welded …

Friction welding of Al 7075-T6 alloy and 316 L stainless steel carried out for different times
under a constant friction and forging pressure, a forging time, rotational speeds …

Fe–40Al alloy were welded by the friction welding technique. Samples were welded for
different welding time under a constant forging and friction pressure at 1000 rmp …

28 КЕРАМИКА: наука и жизнь Технологии Page 1 28 КЕРАМИКА: наука и жизнь Технологии
УДК 621.762 Толочина АВ, Мамонова АА, Окунь ИЮ, Евич ЯИИнститут проблем …