Radiation damage in nanostructured materials
Materials subjected to high dose irradiation by energetic particles often experience severe
damage in the form of drastic increase of defect density, and significant degradation of their …
damage in the form of drastic increase of defect density, and significant degradation of their …
Review of thermal stability of nanomaterials
RA Andrievski - Journal of materials science, 2014 - Springer
Current developments in kinetic and thermodynamic stabilization of grains in nanostructured
metals, alloys, and compounds are generalized and discussed in detail. As applied to the …
metals, alloys, and compounds are generalized and discussed in detail. As applied to the …
The stabilization of nanocrystalline copper by zirconium
MA Atwater, RO Scattergood, CC Koch - Materials Science and …, 2013 - Elsevier
Alloys of copper (Cu) and zirconium (Zr) were generated by mechanical alloying via
cryogenic, high-energy ball milling and then annealed to a maximum temperature of 1000° …
cryogenic, high-energy ball milling and then annealed to a maximum temperature of 1000° …
Influence of Mn solute content on grain size reduction and improved strength in mechanically alloyed Al–Mn alloys
Al–Mn alloys with a solid-solution Mn content ranging from 0 to 3.1 at% were successfully
prepared by high energy mechanical alloying at room temperature of an Al–8 at% Mn …
prepared by high energy mechanical alloying at room temperature of an Al–8 at% Mn …
Nanostructures under extremes
RA Andrievski - Physics-Uspekhi, 2014 - iopscience.iop.org
This paper reviews current research into the behavior of nanostructures under extreme
conditions such as high temperatures, irradiation, and deformation. It describes methods for …
conditions such as high temperatures, irradiation, and deformation. It describes methods for …
Thermal stability and mechanical properties of Fe-Cr-Zr alloys developed by mechanical alloying followed by spark plasma sintering
The present work aims to investigate (i) the feasibility of formation of Fe-7Cr-xZr and Fe-15Cr-
xZr (x= 0.25, 0.5 and 1 at%) disordered solid solutions by mechanical alloying (MA) and (ii) …
xZr (x= 0.25, 0.5 and 1 at%) disordered solid solutions by mechanical alloying (MA) and (ii) …
[PDF][PDF] Наноструктуры в экстремальных условиях
РА Андриевский - Успехи физических наук, 2014 - scholar.archive.org
Рассмотрение поведения веществ и материалов в экстремальных состояниях
вызывает в последнее время большой интерес (см., например,[1-6]). Эта тематика …
вызывает в последнее время большой интерес (см., например,[1-6]). Эта тематика …
Feasibility of formation of nanocrystalline Fe-Cr-Y alloys: Mechanical properties and thermal stability
Aim of the present study is to investigate the feasibility of formation of Fe-Cr-Y disordered
solid solutions by mechanical alloying and effect of Y on the thermal stability and …
solid solutions by mechanical alloying and effect of Y on the thermal stability and …
Thermal stability of consolidated metallic nanomaterials
RA Andrievski - Russian Chemical Reviews, 2014 - iopscience.iop.org
The results of applications of theoretical kinetic and thermodynamic approaches to
estimation of thermal stability of consolidated nanomaterials based on various metals, alloys …
estimation of thermal stability of consolidated nanomaterials based on various metals, alloys …
Термическая стабильность консолидированных металлических наноматериалов
РА Андриевский - Успехи химии, 2014 - elibrary.ru
Рассмотрены теоретические оценки термической стабильности консолидированных
наноматериалов на основе различных металлов, сплавов и тугоплавких соединений …
наноматериалов на основе различных металлов, сплавов и тугоплавких соединений …