[HTML][HTML] Hydrogen storage behaviours of high entropy alloys: A Review
High entropy alloys (HEAs) formed by multi-principal elements show promising hydrogen
storage performance. However, many aspects of their behaviours remain poorly understood …
storage performance. However, many aspects of their behaviours remain poorly understood …
Competitive strengthening between dislocation slip and twinning in cast-wrought and additively manufactured CrCoNi medium entropy alloys
In situ neutron diffraction experiments have been performed under loading in cast-wrought
(CW) and additively manufactured (AM) equiatomic CoCrNi medium-entropy alloys. The …
(CW) and additively manufactured (AM) equiatomic CoCrNi medium-entropy alloys. The …
Comparative studies on microstructure and properties of CoCrFeMnNi high entropy alloy coatings fabricated by high-speed laser cladding and normal laser cladding
Q Zhang, Q Wang, B Han, M Li, C Hu, J Wang - Journal of Alloys and …, 2023 - Elsevier
Two kinds of CoCrFeMnNi high entropy alloy (HEA) coatings were prepared by high-speed
laser cladding (HS-) and normal laser cladding (N-), respectively. The phase, microstructure …
laser cladding (HS-) and normal laser cladding (N-), respectively. The phase, microstructure …
Studies on high-temperature stability and strengthening mechanisms of high/medium-entropy alloys for potential nuclear applications: The case of FeCrV-based alloys
Z Cheng, J Cui, D Chen, X Gao, J Ren, T Wang… - Materials Science and …, 2023 - Elsevier
High-temperature stability and strengthening mechanisms of high/medium-entropy alloys
(HEAs/MEAs) have been studied for Ti-added FeCrV-based MEAs. Experimental results …
(HEAs/MEAs) have been studied for Ti-added FeCrV-based MEAs. Experimental results …
Effect of Ni addition upon microstructure and mechanical properties of hot isostatic pressed 30CrMnSiNi2A ultrahigh strength steel
Y Duan, W Liu, Y Ma, Q Cai, W Zhu, J Li - Materials Science and …, 2022 - Elsevier
Hot isostatic pressing is an advanced powder metallurgical technology for the production of
complex and special-shaped components made of ultrahigh strength steel. However, due to …
complex and special-shaped components made of ultrahigh strength steel. However, due to …
In-situ neutron diffraction study on a dislocation density in a correlation with strain hardening in Al–Mg alloys
P Thirathipviwat, S Nozawa, M Furusawa… - Materials Science and …, 2022 - Elsevier
It is well known that variations of alloy and microstructural parameters ie, alloy composition
and grain size are favorable ways to improve the mechanical properties in non-heat …
and grain size are favorable ways to improve the mechanical properties in non-heat …
Mechanical performance and deformation mechanisms of ultrastrong yield strength Fe-Cr-Ni-Mn-N austenitic stainless steel at 4.2 Kelvin
J Xin, H Zhang, B Lyu, P Liang, M Boubeche… - Journal of Materials …, 2024 - Elsevier
We report the mechanical performance and microstructural characteristics of a Fe-Cr-Ni-Mn-
N alloy at cryogenic temperatures. The exceptionally high yield strength of 1.5 GPa …
N alloy at cryogenic temperatures. The exceptionally high yield strength of 1.5 GPa …
Microstructures and micromechanical behaviors of high-entropy alloys investigated by synchrotron X-ray and neutron diffraction techniques: A review
Y Huang, N Xu, H Lu, Y Ren, S Li, Y Wang - International Journal of …, 2024 - Springer
High-entropy alloys (HEAs) possess outstanding features such as corrosion resistance,
irradiation resistance, and good mechanical properties. A few HEAs have found applications …
irradiation resistance, and good mechanical properties. A few HEAs have found applications …
Effect of hot rolling on microstructure and mechanical properties of hot isostatically pressed 30CrMnSiNi2A ultrahigh strength steel
Y Cai, H Sun, Q Cai, W Liu, Y Ma, Y Duan - Materials Science and …, 2024 - Elsevier
The prior particle boundaries (PPBs) are a typical powder metallurgy (PM) defect, which
usually leads to the deterioration of mechanical properties in PM materials. In this study, two …
usually leads to the deterioration of mechanical properties in PM materials. In this study, two …
Excellent strength-ductility in Ti-alloyed Fe35Ni35Cr20Mn10 high-entropy alloy
J Zhou, T Jiang, H Liao, H Chen, J Zheng, Y Zhang… - Intermetallics, 2022 - Elsevier
The effect of titanium-alloying on microstructure and mechanical properties of
Fe35Ni35Cr20Mn10 high-entropy alloy (HEA) was studied. The microstructure was …
Fe35Ni35Cr20Mn10 high-entropy alloy (HEA) was studied. The microstructure was …