GH4169 nickel-based superalloy is often used in aero engines, it always suffer from
complicated fretting wear behaviors in the service. To improve the fretting wear performance …

Compared with traditional laser shock peening by nanosecond pulse laser, femtosecond
laser shock peening (FLSP) exhibits superior flexibility and efficiency since it can be carried …

Ultrasonic surface rolling processing (USRP) was carried out at zirconium (Zr) alloy with
different rolling speeds to prepare gradient nanostructured layers, and the corrosion …

In this work, GH4169 dovetail specimens were coated on both sides with a bonded solid
lubricant coating. Fretting fatigue tests were carried out at 500° C and compared with …

The improvement of the wear resistance of NiCrBSi-WC/Co (Ni-WC) coatings is important for
expansion of their application areas. In this work, a method that improves the wear …

The effects of the surface integrity of 7075 aluminum alloy by femtosecond laser modification
(FLM) were investigated, and subsequently the electrochemical corrosion behavior of the …

Low energy laser shock peening (LE-LSP) with different energies was carried out at
zirconium (Zr) alloy. Characterization and electrochemical corrosion behavior of Zr alloy …

HT250 Gray cast iron (GCI) commonly utilized in diesel engine cylinders, is susceptible to
fatigue failure under alternating stress conditions. To address this issue, the investigation …

In this study, the compressive creep behavior of Ti–45Al–8Nb alloy fabricated by selective
electron beam melting technology at 800° C and 850° C was investigated. This alloy is …

Improving the high-temperature wear resistance of aero-engine components is critical. Laser
shock peening without coating (LSPwC) seems to have more potential because of lower …