This article reviews original work and important new developments in the field of
deformation behavior of high manganese face-centered cubic γ-Fe alloys. Owing to their …

Abstract Fe-Mn-Al-C steels, previously developed in the 1950s for replacing Fe-Cr-Ni steels,
are currently generating a lot of interest with potential applications for structural parts in the …

Abstract Stacking Fault Energy (SFE) is an intrinsic alloy property that governs much of the
plastic deformation mechanisms observed in fcc alloys. While SFE has been recognized for …

Abstract Effects of Cu, Mn, Al, Ti, Mo on generalized stacking fault energies, Rice-criterion
ductilities, and twinabilities of CoCrFeNi-based face-centered cubic high entropy alloys were …

The stacking fault energy plays an important role in the transition of deformation
microstructure. This energy is strongly dependent on the concentration of alloying elements …

In this study in situ neutron diffraction investigations of a fully austenitic medium-Mn steel
enabled key insights into the temperature dependence of the deformation response with a …

The martensite start temperature is a critical parameter for steels with metastable austenite.
Although numerous models have been developed to predict the martensite start (M s) …

The evolutions of nano-twins and martensitic transformation in 316L austenitic stainless
steel during large tensile deformation were studied by electron backscatter diffraction …

Dynamic strain aging (DSA) and rapid work hardening are typical behaviors observed in
medium-Mn transformation-induced plasticity (TRIP) steel. Three alloys with manganese …

Steels have plasticity-enhancing mechanisms which are not yet fully exploited in automotive
applications. These mechanisms are not yet fully understood and their activation during …