[HTML][HTML] Recent advance in physical description and material development for single component SOFC: A mini-review

T Raza, J Yang, R Wang, C Xia, R Raza, B Zhu… - Chemical Engineering …, 2022 - Elsevier
Despite the high capabilities to replace combustion systems and produce sustainable
energy, solid oxide fuel cells (SOFCs) still have not yet been successfully commercialized. In …

Progress in material development for low-temperature solid oxide fuel cells: A review

M Fallah Vostakola, B Amini Horri - Energies, 2021 - mdpi.com
Solid oxide fuel cells (SOFCs) have been considered as promising candidates to tackle the
need for sustainable and efficient energy conversion devices. However, the current …

[HTML][HTML] Effect of heat treatment on electrical and surface properties of tungsten oxide thin films grown by HFCVD technique

GL Tan, D Tang, D Dastan, A Jafari, JPB Silva… - Materials Science in …, 2021 - Elsevier
The present research focuses on the synthesis, characterization, and electrical properties of
tungsten oxide thin films deposited using the Hot filament chemical vapor deposition …

Recent advances and challenges in thin-film fabrication techniques for low-temperature solid oxide fuel cells

M Choolaei, MF Vostakola, BA Horri - Crystals, 2023 - mdpi.com
Solid oxide fuel cells (SOFCs) are amongst the most widely used renewable alternative
energy systems with near-zero carbon emission, high efficiency, and environment-friendly …

Accelerated design and discovery of perovskites with high conductivity for energy applications through machine learning

P Priya, NR Aluru - npj Computational Materials, 2021 - nature.com
We use machine learning tools for the design and discovery of ABO3-type perovskite oxides
for various energy applications, using over 7000 data points from the literature. We …

[HTML][HTML] Improving the performance of Pr0. 4Sr0. 6Co0. 2Fe0. 7Nb0. 1O3-δ-based single-component fuel cell and reversible single-component cells by manufacturing …

P Li, R Dong, Y Wang, F Yan, L Wang, M Li, D Fu - Renewable Energy, 2021 - Elsevier
A-site deficiency perovskite oxides, Pr 0.35 Sr 0.6 Co 0.2 Fe 0.7 Nb 0.1 O 3-δ, and Pr 0.4 Sr
0.55 Co 0.2 Fe 0.7 Nb 0.1 O 3-δ are prepared and act as the semiconductor for single …

Nickel-iron nanoparticles encapsulated in carbon nanotubes prepared from waste plastics for low-temperature solid oxide fuel cells

Q Liu, F Wang, E Hu, R Hong, T Li, X Yuan, XB Cheng… - Iscience, 2022 - cell.com
Low-temperature solid oxide fuel cells (LT-SOFCs) are a promising next-generation fuel cell
due to their low cost and rapid start-up, posing a significant challenge to electrode materials …

Evaluating the Effect of B-Site Cation Doping on the Properties of Pr0.4Sr0.5Fe0.9Mo0.1O3 for Reversible Single-Component Cells

P Li, P Yang, T Shao, Y Han, R Dong… - Industrial & …, 2022 - ACS Publications
Doping different cations into the B-sites of perovskite oxides is often used to increase the
concentration of oxygen vacancy (V o••), further enhancing their electrocatalytic activity. In …

[HTML][HTML] Synthesis and applicability study of novel poly (dopamine)-modified carbon nanotubes based polymer electrolyte membranes for direct methanol fuel cell

F Altaf, R Gill, R Batool, H Majeed, G Abbas… - Journal of …, 2020 - Elsevier
Novel sulfonated polysulfone (SPS) based composite polymer electrolyte membranes
(PEMs) filled with polydopamine modified carbon nanotubes (PD-CNTs) have been …

[HTML][HTML] Low-temperature constrained sintering of YSZ electrolyte with Bi2O3 sintering sacrificial layer for anode-supported solid oxide fuel cells

Y Lim, H Lee, J Park, YB Kim - Ceramics International, 2022 - Elsevier
Solid oxide fuel cells (SOFCs) have strong potential for next-generation energy conversion
systems. However, their high processing temperature due to multi-layer ceramic …