Hybrid model for the prediction of residual stresses induced by 15-5PH steel turning
This study presents the development of a hybrid model for the prediction of residual stresses
induced during the finish turning of a 15-5PH martensitic stainless steel. This new approach …
induced during the finish turning of a 15-5PH martensitic stainless steel. This new approach …
Numerical simulation of tool wear in drilling Inconel 718 under flood and cryogenic cooling conditions
A Attanasio, E Ceretti, J Outeiro, G Poulachon - Wear, 2020 - Elsevier
This paper aims to model and simulate tool wear in drilling of Inconel 718 under two different
cooling conditions, using an innovative numerical procedure. Although tool wear models …
cooling conditions, using an innovative numerical procedure. Although tool wear models …
3D modeling of residual stresses induced in finish turning of an AISI304L stainless steel
This paper addresses the development of a new methodology predicting residual stresses
induced in finish turning of a AISI304L stainless steel. A hybrid approach combining …
induced in finish turning of a AISI304L stainless steel. A hybrid approach combining …
Finite element simulation and experimental investigation of residual stresses in ultrasonic assisted turning
M Khajehzadeh, O Boostanipour, MR Razfar - Ultrasonics, 2020 - Elsevier
The residual stresses in the machined workpiece are of great importance due to their
influence on the workpiece fatigue life, as well as its dimensional and geometric accuracy …
influence on the workpiece fatigue life, as well as its dimensional and geometric accuracy …
3D numerical modelling of turning-induced residual stresses–A two-scale approach based on equivalent thermo-mechanical loadings
M Dumas, D Fabre, F Valiorgue, G Kermouche… - Journal of Materials …, 2021 - Elsevier
Nowadays, fatigue life of engineering components is a major topic. In the literature,
extensive works have been reported in order to assess the machining-induced surface …
extensive works have been reported in order to assess the machining-induced surface …
3D-FEM approach of AISI-52100 hard turning: modelling of cutting forces and cutting condition optimization
In the present study, a 3D finite element (FE) model for machining AISI-52100 steel was
proposed, with respect to three levels of cutting speed (100 m/min, 150 m/min and 200 …
proposed, with respect to three levels of cutting speed (100 m/min, 150 m/min and 200 …
[HTML][HTML] Experimental and numerical analyses of residual stress redistributions in large steel dies: Influence of tempering cycles and rough milling
The aim of the present research was to study the residual stress variations induced by heat
treatment and rough milling operations of large forged steel blocks. The heat treatment …
treatment and rough milling operations of large forged steel blocks. The heat treatment …
Impact of cutting tool wear on residual stresses induced during turning of a 15-5 PH stainless steel
Finish turning is one of the key operations governing the residual stresses below the
machined surface. The residual stress state depends on the cutting conditions and on the …
machined surface. The residual stress state depends on the cutting conditions and on the …
3D numerical modelling of residual stresses induced by reaming
T Leveille, F Valiorgue, M Dumas… - Journal of Manufacturing …, 2024 - Elsevier
The fatigue life of safety components is a major issue for many economic sectors, including
aeronautics and energy. In the scientific literature, the link between surface integrity …
aeronautics and energy. In the scientific literature, the link between surface integrity …
An experimental and simulation validation of residual stress measurement for manufacturing of friction stir processing tool
Residual stresses have been considered to be an important parameter when friction stir
processing (FSP) tool is to be manufactured. FSP has often been used for surface …
processing (FSP) tool is to be manufactured. FSP has often been used for surface …