Metal matrix composites (MMCs), through a proper selection of matrix and reinforcement,
offer unusual combinations of physical and mechanical properties such as high specific …

A SiC whisker reinforced pure aluminum composite (SiCw/Al) was fabricated using a
squeeze casting route and cold-rolled to 50% reduction in thickness. Some cold-rolled …

The thermostability of 6351Al and TiB2/6351Al during heat treatment was investigated
utilizing X-ray diffraction. Domain size and microstrain were calculated by modified Warren …

In this work, specimens of the 2024 aluminum alloy sheet were compressed and stretched
along the original rolling direction at elevated temperatures. The microstructure evolution …

The effect of TiO2 (rutile) particles on recrystallization kinetics of Al–2Mg–TiO2 composites
has been studied. These composites were prepared using modified spray forming and …

The microstructural development during cold rolling and static recovery of an Al alloy (AA
2014) and an AA 2014 particulate-reinforced metal matrix composite (PMMC) was …

Al-SiCw composites can be readily shaped with conventional secondary metalworking
techniques. During such forming operations, Al-SiCw composites may experience …

A metal matrix composite (MMC) consisting of AISI 304 austenitic stainless steel with up to
10 vol.‐% MgO‐PSZ was produced by a powder metallurgic process through sintering at …

Актуальность исследования. Материалы на основе алюминия широко применяются
практически во всех отраслях промышленности, в том числе авиакосмической, в …

Metal matrix composites (MMCs) have received considerable attention over a number of
years because of their potentially high elastic modulus and specific strength (Taya and …