Multi-material structure fabrication has the potential to address some critical challenges in
today's industrial paradigm. While conventional manufacturing processes cannot deliver …

The carbide phase in the coating can enhance the wear resistance, corrosion resistance,
heat resistance, and oxidation resistance of the coating. Because the carbide-based coating …

In this study, an Ni-based gradient composite coating reinforced with WC was prepared on a
Q345R steel substrate by laser cladding. The Ni-WC composite coating was designed as a …

To enhance the quality and wear-resistance of metal-based composite coatings, Ni62
composite coatings were prepared by laser cladding 65Mn surfaces with WC and TiC as …

AlCoCrFeNi has excellent mechanical properties, however, its hardness and wear
resistance are insufficient for engineering applications. In order to improve the wear …

The evolution of microstructure and wear resistance of Co-based alloy coating reinforced
with WC phase prepared on copper substrate by plasma cladding were investigated. As the …

High manganese steel (30CrMnSi) is usually used to prepare the components which works
under a high load for long time. In order to extend its service life, the high manganese steel …

Ultrasonic vibration was introduced during laser cladding Ni-60% WC-0.8% La 2 O 3
coatings in this study. The microstructure, elemental distribution, and properties of the …

Direct metal laser deposition of ceramic-metal composite coatings has received much
attention in the recent past over other conventional methods due to a large number of …

In this study, IN718/WC composite coatings were fabricated by electromagnetic compound
field-assisted laser cladding. The macrostructure, microstructure, and microhardness of the …