The quest for nanoscaling has extended beyond traditional metal oxides (1-4) and metal
(0),(5) as exemplified by the huge development of “quantum dots” chalcogenide …

The influence of Cu addition on the microstructure and superconducting performance of ex-
situ sintered MgB 2 is systemically studied. It is found that the critical current density (J c) of …

DOI: 10.1002/adma. 201501352 the carbon in boron lattices increases the impurity
scattering, which raises the upper critical field and thereby the high-field critical density …

The un-doped Mg 11 B 2 and Cu-doped Mg 11 B 2 bulks using 11 B as a boron precursor
were fabricated by solid-state reaction and sintered at different temperature in present work …

DOI: 10.1002/adma. 201402794 to or even better than commercially used superconductors,
MgB 2 also has a simple crystalline structure, low density and can be synthesized from …

Extending the holding time and slightly excessive Mg addition and Mg-Cu co-addition are
introduced to the MgB 2 superconductors prepared by ex-situ sintering method aiming to …

Mg11B2 has a great application prospect in the superconducting coils for fusion reactor as
the “low activation superconductors”. The un-doped Mg11B2 and Cu-doped Mg11B2 bulks …

The effect of morphology with magnesium (Mg) powder on phase formation and critical
current density (Jc,) of sintered Mg11B2 bulk was studied. As a precursor for the formation of …

Superconducting MgB 2 nanopowder has been synthesized through chemical reaction
between lithium borohydride and magnesium hydride at relatively low temperatures. From …

Magnesium diboride (MgB2) is considered a promising material for practical application in
superconducting devices, with a transition temperature near 40 K. In the present paper …